Touffset EG55 is a multi component anchor cartridge system g based on a high grade epoxy resin with superior chemical and abrasion resistance. Touffset EG55 is having high bond strength to concrete, steel, wood and other available substrates. Its it suitable for dry, damp and wet substrates.
Solvent and Formaldehyde free
Chemical resistance and waterproof
Shrinkage free and high grab.
High Load Capacity and Uniform distribution of the load
Impact and vibration resistant.
Excellent adhesion , Suitable for horizontal and vertical applications
LEED compliant ultralow VOC Level
Field of Application
Touffset EG55 is a high strength material with no shrinkage and suitable for anchor grouting in high abrasion, chemical resistance and immersed situations. Common uses are :-
Fixing to masonry and rock
Post installation re-bar
Bonding and Crack sealing applications
Anchoring structural steals
Anchors for machinery and cranes
Fixing of Starter bars, anchor bolts, anchor sockets and threaded studs
Suitable for extreme temperature variant applications
Suitable for installation of fence and railing posts, gates, window grills, bathroom fittings, ac units and lights
Application - Hole Preparation Anchor bolt holes should be drilled using air or rotary percussion drilling equipment. If diamond core or non percussive drills are used then sides of the hole must be thoroughly roughened
Drill hole to the desired correct diameter and depth
Clean out the hole using a stiff wire or nylon brush and clean compressed air
Remove the cap and plugs from the cartridge .
Attached mixer nozzle , place in applicator and dispose the part of the cartridge
waste until an even colour is achieved
Insert the mixer nozzle to the far end of the hole and half fill the hole. Withdrawing the nozzle as the hole fills . For deep holes , extension tubing can be used
Immediately insert the fixing . This should be done slowly with a slight twisting motion
Excess resin should be removed from the mouth of the hole before it sets
Leave the fixing undisturbed until loading time is elapsed
Attach the fixture and tighten the nut
Packaging Standard Cartridges
Shelf Life Store in dry conditions between 5°C to 40°C. The shelf life is 12 months when unopened and stored correctly.
Cleaning Clean all tools and equipment immediately with OrgaCLEAN or any suggested cleaning agent
Health and Safety This product is for industrial use only by trained operatives. It is potentially hazardous if not used correctly. Please refer to the Material Safety Data Sheet (MSDS) prior to the purchase and use of this product. The MSDS can be obtained from support@ organixbs.com.