|Packaging Type||Plastic Barrels, Drums Tanker|
|Packaging Size||0-5kg, 10-15 kg 15-20kg, 20-25kg and 50-100kg|
|Features||Longer Shelf Life|
|For More Information Click Here PDF||View|
TOPGROUT E70 is a multi component epoxy tile grout based on a high grade epoxy resin system with superior chemical and abrasion resistance. TOPGROUT E70 is having high bond strength to concrete , steel , wood and other available substrates.
Field Of Application
TOPGROUT E70 is a high strength material with no shrinkage, and suitable for grouting tiles in high abrasion, chemical resistance and immersed situations. TOPGROUT E70 suitable to use to grout the tile for residential and industrial floor and wall such as laboratories, food processing plants, hospitals, abattoirs, kitchen and swimming pool where superior resistance properties are required. TOPGROUT E70 suitable for internal and external applications and is impervious to water and other liquids.Chemical Resistant –Acids Excellent to Citric Acid, Tartaric Acid, Nitric Acid, Formic Acid, Lactic Hydrochloric Acid,Sulphuric Acid etc.
Chemical Resistant –Alkalis
Excellent to Ammonia in solution, Caustic soda, Chlorine, Sodium bisulphite, Potassium hydroxide, Potassium permanganate
Available in different RAL colours
3, 5 & 10 Kg Set. Larger packs available upon request.
Store in dry conditions between 5°C to 40°C. The shelf life is 12 months when unopened and stored correctly.
TOPGROUT E70 provides detailed method statements on all its products for use in various applications. These must be referred to prior to starting work. The information below is a summary intended for guidance only.
The tile joints must be clean, free of any contamination.
Mix components together thoroughly with a slow speed drill for 2 to 3 minutes (max 400 R.P.M.) and continue mixing until homogeneous. Packs can be split if suitable weighing and measuring equipment is available at the job site. Where multiple small areas are to be grouted, transfer the mixed grout to clean buckets and distribute to the grouting teams to allow them to use the product within 45 minutes.
TOPGROUT E70 should be applied after 12 hours but within 24 hours after application of the tile adhesive. This will help ensure uniform stress distribution at the bond line and maximum bond. Apply using a rubber grouting spatula or trowel, taking care to ensure that is well compacted into the joints. Excess material should be removed immediately from the tile surface using a damp cloth or sponge.
Ensure that movement and perimeter joints are incorporated as per the relevant Code of Practice.
Clean all tools and equipment immediately with OrgaCLEAN or any suggested cleaning agent
Health and Safety
This product is for industrial use only by trained operatives. It is potentially hazardous if not used correctly. Please refer to the Material Safety Data Sheet (MSDS) prior to the purchase and use of this product. The MSDS can be obtained from support@ organixbs.com