Latest Products http://www.organixbuildingsystem.com Latest Products Mon, 23 Nov 2020 11:56:48 +0530 en-us http://www.organixbuildingsystem.com Waterproofing Chemicals http://www.organixbuildingsystem.com/waterproofing-chemicals.htm http://www.organixbuildingsystem.com/waterproofing-chemicals.htm Wed, 21 Oct 2020 00:00:00 +0530 Construction Sealants http://www.organixbuildingsystem.com/construction-sealants.htm http://www.organixbuildingsystem.com/construction-sealants.htm Wed, 21 Oct 2020 00:00:00 +0530 Industrial Flooring http://www.organixbuildingsystem.com/industrial-flooring.htm http://www.organixbuildingsystem.com/industrial-flooring.htm Wed, 21 Oct 2020 00:00:00 +0530 Protective Coatings & Sealers http://www.organixbuildingsystem.com/protective-coatings-sealers.htm http://www.organixbuildingsystem.com/protective-coatings-sealers.htm Wed, 21 Oct 2020 00:00:00 +0530 Construction Chemicals http://www.organixbuildingsystem.com/construction-chemicals.htm http://www.organixbuildingsystem.com/construction-chemicals.htm Wed, 21 Oct 2020 00:00:00 +0530 EPDM Waterproofing Membrane http://www.organixbuildingsystem.com/epdm-waterproofing-membrane.htm http://www.organixbuildingsystem.com/epdm-waterproofing-membrane.htm Wed, 21 Oct 2020 00:00:00 +0530 DryTex Roof Waterproofing Chemicals http://www.organixbuildingsystem.com/drytex-roof-waterproofing-chemicals.htm http://www.organixbuildingsystem.com/drytex-roof-waterproofing-chemicals.htm Wed, 21 Oct 2020 00:00:00 +0530 DryTex ROOF is a fluid applied, white, flexible waterproof and UV protective coating formulated with 100% advanced acrylic elastomeric resin which forms a membrane of protection that expands and contracts with roofs . DRYTEX ROOF truly waterproof flat oofs, pitched roofs, Parapet Walls, Metal Roof Decks, Terraces, exposed and build up substrates of various types and provide a seamless waterproofing membrane that stays watertight longer than conventional seamed roofs. It will not crack, crumble, or peel despite exposure to severe weather or total joint movement.Features Completely seamless roof Energy Star rated product which saves Energy Reflects the sun's UV-rays & Protects corrosion Good resistance to alkalis, salt solutions and diluted acids Excellent bonding to most substrates Low VOC, non-toxic and environmentally compliant Fungus resistant, Protect against carbonation and chloride ion diffusion Fire retardant ( ASTM E 84 ) and Excellent UV resistant No asbestos and Hazard chemicals content, doesn’t release any hazardous vapours Field of Application DryTex ROOF remains flexible beneath the surface, bridging cracks and moving with the building structures. DryTex ROOF 100 % Acrylic Elastomeric coating cures harder than traditional elastomeric coatings on the outermost surface, giving this product much better resistance to dirt accumulation. DryTex ROOF is an ideal waterproofing system for all types of roofs and other wet areas of buildings and homes. This product can be exposed and also be part of tiled systems. An Ideal coating system formulated to waterproof universal requirements to suit all types of substrates.Installation(a) Surface Preparation Surfaces to be coated must be clean, dry and free of any oil, grease or dirt. Patch and  repair cracks, blisters and other problem areas using suitable materials recommended by  ORGANIX technical support. Any existing coating must be checked for good adhesion. The loose existing waterproof systems should be removed well. Clean by wire brush and use pressured air to blow out all the dust.(b) Application - Tools or equipments to be used for the application Roller (Short nap roller) Brush (Good quality synthetic bristle brush) Spray (Airless Sprayer, 1gpm, 3,000 psi, .027 or .031 tip) (c) Mixing Mix the contents of the pail well enough to remove any sediment .Up to 20 % of clean water can be added to dilute the given material to have enough consistency if necessary during application according to site conditions and project requirements without affecting the specified properties.(d) Coating Application All roof-preparation materials must be allowed to dry prior to application of the DryTex coating. Immediately prior to application of the coating, all dust, dirt and other contaminants should be blown off the roof surfaces using compressed air. Apply well mixed DryTex ROOF at the rate of 0.6Kg/Sqm at the entire roof using a brush or roller by multi pass spray technique to ensure even coating application to all sides of the substrate. After min four hours, apply the second coat of DryTex ROOF by cross link technology. Make a conscious effort to apply coating into crimped or pre-sealed vertical (side-lap) seams that have not been detailed. While applying, back roll to force material in to voids and even out film. Do not apply if rain is threatening. Do not apply if ambient and surface temperatures are within 5 degrees of the dew point and falling. Packing20 Litre Pail StorageStore materials under covered roof with careful handling to prevent damage to products. If conditions exceed these ranges, special consideration in storage must be taken. Do not store at high temperatures in direct sunlight. Shelf life under normal conditions in closed container will be 12 months.Environmental Health and Safety Information DryTex ROOF is completely environmental friendly product and don’t produce any harmful fumes or vapour to human being. For more details refer most updated version MSDS of the product Warranty As a part of the ORGANIX Building System on preapproved, qualified applications, when use an approved applicator, a 10-year warranty is available. Contact OBS for complete warranty information. Drytex PU Waterproofing Chemicals http://www.organixbuildingsystem.com/drytex-pu-waterproofing-chemicals.htm http://www.organixbuildingsystem.com/drytex-pu-waterproofing-chemicals.htm Wed, 21 Oct 2020 00:00:00 +0530 DRYTEX PU is a one - component, VOC compliant, ready to use ,elastic, polyurethane based liquid applied waterproofing membrane. It cures by reaction with humidity, maintains its elasticity, suitable for applications to horizontal and vertical surfaces. DRYTEX PU is specially designed from a blend of polyurethane, reinforced with special water repelling fillers, minerals, stabilizers and gelling agent. Features It’s a highly elastic product, cures to a seamless rubber like membrane capable of withstanding severe cases of expansion, contraction and deck movements. Highly resistant to oxidation, UV light and ozone because of unique additives used in compounding it. It does not crack. Highly resistant to abrasion, water and root penetration. Superior wetting and adhesion properties ensure durable bond and resistance to peeling, chipping, and or separation and a longer life Has the unique property of adapting itself over the irregular contours of the deck and forming a waterproof and impervious blanket On- Walkable ( light traffic ) and resistant to chemicals Resistant to salty water and chemicals Ultra Low VOC, LEED and Green Building Construction comply product Application fieldIdeal waterproofing system for concrete based roof, wet area (toilets, bathrooms, kitchen, balcony) as an under tiling membrane, maintenance of existing roofs, masonry and concrete walls, basements, bridges, decks, podium, flower beds, planters area, terraces, corrugated metal roof etc.Installation(a) Surface PreparationSurface to be waterproofed shall be dry, clean, sound and free of all contaminants which may interfere with adhesion or proper curing. The substrates should not contain holes or cracks and should be dust-free. All shrinkage cracks shall be treated with suitable material. Moving structural cracks greater than 2 mm shall be routed out and caulked with approved ORGANIX material. Detailing like horizontal-vertical junctures, projections, expansion joints and other areas of potential high movement may require reinforcement mate and sealants to detail. Consult with OBS tech for further information. All detailing must be cured for a minimum period of 12 hours prior to the application of the liquid membrane. Detailing shall be wiped clean prior to the application of the membrane.(b) Tools or Equipment - Tools or equipment to be used for the application Roller (Short nap roller) Brush (Good quality synthetic bristle brush) Spray (Airless Sprayer, 1gpm, 3,000 psi, .027 or .031 tip) (c) Reinforcing the required areas (Optional) Detailing like horizontal-vertical junctures, projections, expansion joints and other areas of potential high movement may require approved reinforcement mat and sealants to detail. Consult with OBS t for further information. All detailing must be cured for a minimum period of 12 hours prior to the application of the liquid membrane. Detailing shall be wiped clean prior to the application of the membrane.(d) Coating Application Before application, mix DRYTEX PU liquid well with a slow and stable speed mechanical mixer at least for 3 minutes. The mixing container should be dry and clean.This rapid setting liquid is spread at the desired thickness onto the prepared surface. The coating is applied from the container using standard roofing brushes, squeegees or airless spray equipment at the recommended coverage rates on properly cleaned and prepared dry substrates. Application of the DRYTEX PU System should be done in one complete step to create a smooth uniform self leveling surface without cold joints, lines or streaks. Apply the first coat at the rate of 0.6 kg / sq.m Let it dry (approximately 4-6 hours should be waited between two layers), then apply the second coat at the rate of 0.6 kg /sq.m rate. Waiting time shortens in hot weather and lengthens in cold weather. Full cure for foot traffic and flood test require min curing period of 48 hours. Packing20 Kg Pail Storage and Shelf lifeStore materials in dry and covered place with careful handling to prevent damage to products. If conditions exceed these ranges, special consideration in storage must be taken. Shelf life under normal conditions in closed container will be 12 months.Warranty On preapproved, qualified applications, when you use an approved applicator, a 25-year warranty is available. Contact us for complete warranty information.Product information contained herein are presented in good faith and believed to be reliable. They do not constitute part of our terms and conditions of sale. It is also not a guarantee, either expressed or implied, that the data are correct or that products described are merchantable or fit for a particular purpose as methods of use are beyond our control. Customer should determine the suitability of our materials and installation recommendations before usage. Manufacturer's sole responsibility shall be to replace that portion of any product that proved to be defective. DryTex HB500 Waterproofing Chemicals http://www.organixbuildingsystem.com/drytex-hb500-waterproofing-chemicals.htm http://www.organixbuildingsystem.com/drytex-hb500-waterproofing-chemicals.htm Wed, 21 Oct 2020 00:00:00 +0530 DRYTEX HB500 is a fluid applied, cross linked, tough, flexible and sustainable waterproof membrane, engineered with polyurethane modified elastomeric acrylic polymers which forms a thick rubber-like blanket of protection, insulation and waterproofing that expands and contracts with substrate. DRYTEX HB500 truly waterproof flat roofs, substructure, basement slab roof, pitched roofs, Parapet Walls, Metal Roof Decks, Terraces, etc., and provide a seamless membrane that stays watertight longer than conventional seamed membrane. It will not crack, crumble, or peel despite exposure to severe weather or total joint movement. It will provide a 100% waterproof and weather proof seal adhering tightly to any surface. This product forms a thick, rubber shield that expands and contracts to prevent cracking and substrate damage. This silicone enhanced product offers unbeatable waterproof protection and long term life. It also provides a highly protective barrier which reflects the sun’s heat and destructive UV rays.Features Completely seamless high build waterproofing membrane 100% adhesion of system to substrate and Chemical resistant Expands and contracts - clings to your roof in all temperatures Energy star product for Green roofing for energy efficiency Completely UV resistant & Protects corrosion VOC free, non-toxic and environmentally compliant Fire retardant and provide insulation to heat and sound. Resistance to chemicals Application fieldFor waterproofing and protecting a wide assortment of substrates that are structurally sound. Designed for roof waterproofing solution for new build and refurbishment projects (exposed or concealed) Roofs of most substrates (concrete, corrugated metal, cement screed, glass, timber etc) Wet areas and Podium as an under tiling waterproofing membrane Façade, Pool and Planters area Building Substructure and superstructureInstallation (a) Surface Preparation Surfaces to be coated must be clean, dry and free of any oil, grease or dirt. Patch and repair cracks, blisters and other problem areas using suitable materials recommended by ORGANIX technical support. Any existing coating must be checked for good adhesion. The loosen materials should be removed well. Clean by wire brush and use pressured air to blow out all the dust.(b) Tools required - Tools or equipments to be used for the application Roller (Short nap roller) Brush (Good quality synthetic bristle brush) Spray (Airless Sprayer, 1gpm, 3,000 psi, .027 or.031 tip) (c) Reinforcing with FLEXIK. Overlaps, corroded edges, penetrations of pipes or ducting should be reinforced by FLEXIK reinforcement or any approved compatible material (Contact ORGANIX for selecting the proper reinforcement product). If the reinforcement is by mat or fabric,apply a light coat of Liquid DRYTEX HB500, center the reinforcement fabric on the overlap and roll it out taking care not to create wrinkles press fabric down with squeegee. All fasteners should be sealed or capped with DRYTEX HB500 or SEALFLEX sealant with reinforcement material.(d) Coating Application All substrate-preparation materials must be allowed to dry prior to application of the DRYTEX HB500 coating. Immediately prior to application of the coating, all dust, dirt and other contaminants should be blown off the roof surfaces using compressed air. As it is a ready to use product, just mix the single pack itself thoroughly before use. Cover the entire roof substrate as follows. Apply the basecoat at a rate of minimum 0.6 kg/sq.m. After allowing the basecoat to dry, apply the topcoat at a rate of minimum 0.6 kg / sq.m using a cross hatch technique. Apply the elastomeric coating by brush, roller or airless spray using a multi pass spray technique to ensure even coating application to all sides of the substrate. Make a conscious effort to apply coating into crimped or pre-sealed vertical (side-lap) seams that have not been detailed. Packing20 Kg Pail Storage and Shelf lifeStore materials in dry and covered place with careful handling to prevent damage to products. If conditions exceed these ranges, special consideration in storage must be taken. Shelf life under normal conditions in closed container will be 12 months.Warranty On preapproved, qualified applications, when you use an approved applicator, a 25-year warranty is available. Contact us for complete warranty information.Product information contained herein are presented in good faith and believed to be reliable. They do not constitute part of our terms and conditions of sale. It is also not a guarantee, either expressed or implied, that the data are correct or that products described are merchantable or fit for a particular purpose as methods of use are beyond our control. Customer should determine the suitability of our materials and installation recommendations before usage. Manufacturer’s sole responsibility shall be to replace that portion of any product that proved to be defective. DryTex PU TC 90 Waterproofing Chemicals http://www.organixbuildingsystem.com/drytex-pu-tc-90-waterproofing-chemicals.htm http://www.organixbuildingsystem.com/drytex-pu-tc-90-waterproofing-chemicals.htm Wed, 21 Oct 2020 00:00:00 +0530 DRYTEX PU TC 90 is a two component, polyurethane-base waterproofing membrane that apply as liquid. Component A and B are separately packed and mixing suitable amount of these two components together on site, then stirred uniformly and finally apply on the substrates. After curing reaction, it will be formed to a tough and flexible waterproofing membrane with high elasticity, suitable for applications to horizontal and vertical surfaces.Outstanding Features It forms a uniform, flexible and elastic seamless waterproofing membrane. Highly resistant to oxidation, UV light and ozone because of unique additives used in compounding it. Excellent mechanical and thermal resistant. Good Abrasion resistant. More durable than normal coatings and lasts longer than most other coatings. Superior wetting and adhesion properties ensure durable bond and resistance to peeling, chipping, and or separation and a longer life. It is extremely chemical resistant. Has the unique property of adapting itself over the irregular contours of the deck and forming a waterproof and impervious. Field of ApplicationDRYTEX PU TC 90 is specially designed for waterproofing of various types of substrate Ideal waterproofing system for concrete based wet area, built up roofs, maintenance of existing roofs, masonry and concrete walls, bathrooms, basements, bridges, decks, metal surfaces etc After curing reaction, it will be formed to a tough and flexible waterproofing membrane with high elasticity, suitable for applications to horizontal and vertical surfaces.Installation(a) Surface PreparationSurfaces to be coated must be clean, dry and free of any oil, grease or dirt. Patch and  repair cracks, blisters and other problem areas using suitable materials recommended by  ORGANIX technical support. Any existing coating must be checked for good adhesion. The loose existing waterproof systems should be removed well. Clean by wire brush and use pressured air to blow out all the dust.(b) Application - Tools or equipments to be used for the application Roller (Short nap roller) Brush (Good quality synthetic bristle brush) Spray (Airless Sprayer, 1gpm, 3,000 psi, .027 or .031 tip) (c) MixingMix the contents of the pail well enough to remove any sediment .Up to 20 % of clean water can be added to dilute the given material to have enough consistency if necessary during application according to site conditions and project requirements without affecting the specified properties.(d) Coating Application All roof-preparation materials must be allowed to dry prior to application of the DryTex coating. Immediately prior to application of the coating, all dust, dirt and other contaminants should be blown off the roof surfaces using compressed air. Apply well mixed DryTex ROOF at the rate of 0.6Kg/Sqm at the entire roof using a brush or roller by multi pass spray technique to ensure even coating application to all sides of the substrate. After min four hours, apply the second coat of DryTex ROOF by cross link technology. Make a conscious effort to apply coating into crimped or pre-sealed vertical (side-lap) seams that have not been detailed. While applying, back roll to force material in to voids and even out film. Do not apply if rain is threatening. Do not apply if ambient and surface temperatures are within 5 degrees of the dew point and falling. Packing20 Litre Pail DryTex warpo 208 Waterproofing Chemicals http://www.organixbuildingsystem.com/drytex-warpo-208-waterproofing-chemicals.htm http://www.organixbuildingsystem.com/drytex-warpo-208-waterproofing-chemicals.htm Wed, 21 Oct 2020 00:00:00 +0530 Single-component, fluid applied high build waterproofing membrane based on synthetic resin which are modified in order to get an absolutely waterproof layer. After curing reaction, it will be formed to a tough and flexible seamless waterproofing membrane with high elasticity, suitable for applications to horizontal and vertical surfaces Performance provides an effective monolithic air, vapor and water proof membrane when applied to most construction surfaces. Cold-applied by brush or roller or airless spray.Outstanding Features It’s a elastic product, cures to a rubber like membrane protects moisture-sensitive substrates. Highly resistant to oxidation because of unique additives used in compounding it. It does not crack and have good resistance to lime water. More durable than normal coating and excellent crack bridging property. Superior wetting and adhesion properties with all type of materials ensure durable bond and resistance to peeling, chipping, and or separation and a longer life Has the unique property of adapting itself over the irregular contours of the deck and forming a waterproof and impervious blanket Suitable for Interior, Exterior applications and good adhesion with various substrates ( Eg;- plasters, gypsum boards, cement screeds, concrete slabs, acoustic underlays cement boards , wooden chipboard etc ) Compatible with all types of tile or natural stone fixing mortars . Ultra Low VOC and comply with Green Building and LEED Requirements Field of Application Ideal waterproofing system for all wet areas under the tiles and stones Bath and Shower rooms Laundries, Kitchens and Saunas Balconies and Terraces Swimming Pool and Water features Installation - Surface PreparationSurface to be waterproofed shall be dry, clean, sound and free of all contaminants which may interfere with adhesion or proper curing and should be dust-free. All shrinkage cracks shall be treated with suitable material. Moving structural cracks shall be routed out and caulked with approved ORGANIX material. Detailing like horizontal-vertical junctures projections, expansion joints and other areas of potential high movement may require reinforcement mat and sealants to detail. Consult with OBS tech for further information. All detailing must be cured before the application of WAPRO.ApplicationThis liquid is spread at the desired thickness onto the prepared surface. The coating is applied from the container using standard roofing brushes, squeegees or rollers or airless spray equipment at the recommended coverage rates on properly cleaned and prepared dry substrates. Application of the System should be done in one complete step to create a smooth uniform self leveling surface without cold joints, lines or streaks. Apply the first coat at the rate of 500 micron thickness. Let it dry fully (approximately 2 hours should be waited between two layers), then apply the second coat (500micron thick ness) . Waiting time shortens in hot weather and lengthens in cold weather. Allow to dry for a minimum of 3 hours before tiling , build up or trafficable. Health and SafetyWear protective clothing, gloves and goggles. Skin:- Avoid repeated or prolonged contact, if contact occurs , clean with hand cleaner that removes oil or grease , then clean with soap and water. Eyes :- Contact could cause irritation. If contact occurs, flush with clean water. Inhalation:-Can cause dizziness. Remove to fresh air and if breathing difficulty persists, administer oxygen.Packing 20 Kg PailStorage Store in cool, dry area. Product is not flammable. Do not allow to freeze. Shelf life - 12 monthsConditions of Use and DisclaimerThe information contained in this Material Data Sheet is given in good faith based upon our current knowledge and does not imply warranty, express or implied. The information is provided and the product is sold on the basis that the product is used for its intended purpose and is used in a proper workmanlike manner in accordance with the instructions of the Product Data Sheet in suitable and safe working conditions. Under no circumstances will the Company be liable for loss, consequential or otherwise, arising from the use of the product. DryTex CEM-HF Waterproofing Chemicals http://www.organixbuildingsystem.com/drytex-cem-hf-waterproofing-chemicals.htm http://www.organixbuildingsystem.com/drytex-cem-hf-waterproofing-chemicals.htm Wed, 21 Oct 2020 00:00:00 +0530 It is suitable for water and wastewater tanks, secondary containment structures, tunnels, concrete slabs, bathrooms, retain walls, Planter boxes, swimming pool DRYTEXCEM HF is a cementitious slurry mortar, consisting of dry Component A and liquid Component B. UV resistant Crack resistant and Superior Flexibility Superior freeze/thaw resistance Excellent resistance to salt, acids, alkalis and other chemicals Effective protection against acid rain Self-curing and breathable Continuous water immersion possible so ideal for swimming pool Good for potable water SurafcePreperation deteriorated and loose concrete, form release agents, oil, grease, laitance, dust, dirt and areas using OBS recommended material. cracks larger than 2 mm with DRYTEX CEM HF or any other material recommended by OBS Embed a strip of reinforcing mat into the wet DRYTEX CEM HF and apply a second coat to fully cover the reinforcing mat ( Consult OBS technical support to select the suit able reinforcement material according to the substrate). MixingMix in a clean container by slowly adding the powder component to the liquid component and mixing with low speed drill and mixing paddle. Gradually add the pow der to the mixing liquid while the drill is running. Pot life is 60 min @ 35 °C.ApplicationCan be applied conventionally by brush ,roller or spray equipment.. It is recommended Membrane has excellent high build properties, and can be built up to 2000 micron wet in one application. However from a curing point of view and dependant on weather conditions at the time of application, it is more pertinent to apply and build up the mem brane in two or more coats, to allow quicker cure in each stage. The thicker the applica tion the longer the cure. Coverage0.8 litre of mixed membrane applied wet at 600micron thick will cover 1-latent curing mechanism activated by water loss happens in 3 stages. Firstly there is the initial evaporation of the majority of water in the system, followed by the second stage where the surface skins over and cures. The third stage (which takes a minimum of 6-2days) is to complete cure and gain of cohesive strength. The application of the second coat can proceed after stage two. This is a two stage system, inclusive of the necessary bond breaker requirements being addressed. LimitationsDo not apply DRYTEX CEM-HF when the temperature is expected to be below °4C within 48 hours, or when rain is imminent. Packing15 KG POWDER + 5 L LIQUIDStorage And TransportationDRYTEX CEM-HF, when stored on pallets in dry, cool area from moisture and direct sunlight, has a shelf life of 12 months. The liquid Compo nent B must not freeze. VASTHAF Waterproofing Chemicals http://www.organixbuildingsystem.com/vasthaf-waterproofing-chemicals.htm http://www.organixbuildingsystem.com/vasthaf-waterproofing-chemicals.htm Wed, 21 Oct 2020 00:00:00 +0530 DRYTEX VASTAF PW9400 is a highly flexible elastomeric urethane resin based super elastic waterproofing and protection system designed for use in contact with potable water to waterproof water tanks and reservoirs in new construction and restoration. DRYTEX VASTAF PW9400 is a internal waterproofing lining of potable water reservoir and wastewater tanks, secondary containment structures where superior flexibility ,long lasting and resistance to fungus and chemicals is required (waste water treatment facilities). DRYTEX VASTAF PW400 is a fluid applied seamless waterproofing membrane, consisting of Component A and Component B.Features UV resistant and Abrasion resistant Crack resistant and Superior Flexibility Superior freeze/thaw resistance and corrosion resistant Excellent resistance to salt, acids, alkalis and other chemicals Effective protection against acid rain Self-curing and breathable Continuous water immersion possible Superior negative/positive waterproofing Good for potable water and confirmed for use in drinking water environments (Confirmed to NSF/ANSI 61) Bridges substrate crack up to 3 mm Preparation-Substrate The proper surface preparation is essential for a successful waterproofing. Remove all deteriorated and loose concrete, form release agents, oil, grease, laitance, dust, dirt and efflorescence by dry or wet sandblast, shot blast, or high-pressure water. Repair deeper areas using OBS recommended material. Reinforce and seal all joints, penetrations, cracks using SealFlex construction joint sealants.All bigger cracks must be treated using DRYTEX VASTAF PW9400 and reinforcing mat. Pre fill any open cracks larger than 2 mm with DRYTEX VASTAF PW9400 or any other material recommended by OBS Embed a strip of reinforcing mat into the wet DRYTEX VASTAF PW9400 and apply a second coat to fully cover the reinforcing mat ( Consult OBS technical support to select the suitable reinforcement material according to the substrate). MixingComponent Part A and Part B are separately packed and mixing suitable amount of these two components together on site and then stirred uniformly to have consistency which to be applied on the prepared substrate Pot life is 60 min @ 35 °C.ApplicationCan be applied conventionally by brush ,roller or spray equipment.. It is recommended to apply first coat by brush to obtain optimum adhesion. DRYTEX VASTAF PW400 Waterproofing Membrane has excellent high build properties, and can be built up to 2000 micron wet in one application. However from a curing point of view and dependant on weather conditions at the time of application, it is more pertinent to apply and build up the membrane in two or more coats, to allow quicker cure in each stage. The thicker the application the longer the cure. Coverage0.8 litre of mixed membrane applied wet at 600 micron thick will cover 1 square etre. When bridging wider cracks, bed reinforcing mat into the first layer, allowing for over coating once cured. It is ideal for reinforcing cracks in concrete floors prior to tiling. For all round protection and durability, the final coat in the system should be applied at a rate of 0.8litre per square ,metre giving an optimum dry film thickness. The service life of the membrane is a direct correlation to final dry film thickness. A built in latent curing mechanism activated by loss happens in 3 stages. Firstly there is the initial evaporation of the majority of liquid in the system, followed by the second stage where the surface skins over and cures. The third stage (which takes a minimum of 2-6 days) is to complete cure and gain of cohesive strength. The application of the second coat can proceed after stage two. This is a two stage system, inclusive of the necessary bond breaker requirements being addressed. LimitationsDo not apply DRYTEX VASTAF PW9400 when the temperature is expected to be below 4°C within 48 hours, or when rain is imminent. Packing20 L ( Two Pack System )Storage and transportationDRYTEX VASTAF PW400, when stored on pallets in dry, cool area from moisture and direct sunlight, has a shelf life of 12 months. The liquid Component B must not freeze.Product information contained herein are presented in good faith and believed to be reliable. They do not constitute part of our terms and conditions of sale. It is also not a guarantee, either expressed or implied, that the data are correct or that products described are merchantable or fit for a particular purpose as methods of use are beyond our control. Customer should determine the suitability of our materials and installation recommendations before usage. Manufacturer's sole responsibility shall be to replace that portion of any product that proved to be defective DryTex HP211 Waterproofing Chemicals http://www.organixbuildingsystem.com/drytex-hp211-waterproofing-chemicals.htm http://www.organixbuildingsystem.com/drytex-hp211-waterproofing-chemicals.htm Wed, 21 Oct 2020 00:00:00 +0530 DRYBITUTEX HP.211 is a solvent free fluid applied, SBS elastomeric bitumen jellified emulsion modified with blend of synthetic polymers and special additives with good thyxotropic performance provides an effective monolithic air, vapor and water proof membrane when applied to most construction surfaces. DRYBITUTEX HP.211 cures to a tough monolithic, highly flexible seamless rubber-like membrane ith good adhesion to almost any solid substrate. Cold-applied by brush, roller, trowel or spray.Features Joint less membrane when it cures. Solvent free and non-toxic Crack-bridging capabilities, extremely versatile & high performance. Tough rubber-like – flexible, elastomeric and damageresistant. Single component-cold applied and ready to use Excellent adhesion to most building substrates Efficient curing membrane to newly placed concrete Asbestos free and odorless. Can be applied on damp substrates Excellent resistance against chemicals (Chloride, sulphate ions, acidsand alkalis) Environmentally friendly, cold applied – no flame hazard. Health Friendly and non-hazardous. Applicable in any season and able to withstand temperature fluctuations Easy to apply and Fast cure Field of Application Designed for multi purpose projects Suitable for Roofs, Basements, Bathrooms, Tanks and water features Water proofing /damp proofing of most substrates. Provides an air, vapor and rain barrier to construction surfaces such as masonry, concrete, gypsum board and wood. Protection of foundations , columns and beams. Water proofing, vapor, air protection of structures ,retaining walls and facades For use as an adhesive on wood blocks, wood mosaics, polystyrene insulation boards etc. Waterproofing for interior, exterior walls and wet areas Protection of concrete manholes from corrosive soil ConfirmationBITUTEX HP confirms to ASTM 2939, ASTM D1187, ASTM C309 standards and British standard BS3416, BS 3690 “protection of buildings against water, vapor and air, damp proofing and adhesive used in buildingApplication Procedure - Surface PreperationAll surfaces must be sound, clean and free from dust, oil or grease and other loose materials. Surface may be dump but there should not be any standing water and can be applied to fresh freshly cast concrete too. If requires , a diluted ( 20 % clean water ) prime coat will improve adhesion.ApplicationPrior to the application, stir the product well. Apply in two coats at a spread rate of 1.2 Kg / m² . The succeeding coats should be applied at right angles to the preceding coats. For best results allow each coat to dry then apply next prior to the surface becoming contaminated. If subsequent coats are applied to 'non-cured' coats, inter-coat bubbling may result. The coverage depends upon the substrate, application method and project requirements. Tools : Application may be by brush, roller, or airless spray. Brush : Suitable for small areas and flashings. Use a synthetic bristle brush. Roller : Recommended when coating small areas. Use a smooth roller. Airless Spray : 4000 psi min. ½” hose min. 0.025 to 0.039 inch orifice reversible tip. PackingAvailable in 20 litre Pail.StorageStore materials between 10°C-50°C with careful handling to prevent damage to products. If conditions exceed these ranges, special consideration in storage must be taken. Do not store at high temperatures in direct sunlight. Shelf life under normal conditions in closed container will be 24 months.Health and SafetyKeep out of reach of children. Ensure to maintain good ventilation during application and drying process. In case of skin contact, wash with soap and water or a recognized skin cleaner. Avoid contact with eyes. In case of contact with eyes rinse immediately with running water and seek medical advice. If product is ingested drink plenty of water or milk. Do not induce vomiting at any time. Seek medical advice. Refer to the Material Safety Data Sheet (MSDS) for detailed information about the product and transportation and classification criteria. DryBitumex R650 Waterproofing Chemicals http://www.organixbuildingsystem.com/drybitumex-r650-waterproofing-chemicals.htm http://www.organixbuildingsystem.com/drybitumex-r650-waterproofing-chemicals.htm Wed, 21 Oct 2020 00:00:00 +0530 DRYBITUMEX R650 is a rubberized bituminous waterproof and dampproof coating with good thyxotropic performance provides an effective monolithic air, vapor and water proof membrane when applied to most construction surfaces. DRYBITUMEX R650 cures to a tough monolithic, highly flexible seamless rubber-like membrane with good adhesion to almost any solid substrate. Cold-applied by brush, roller, trowel or spray.Features Joint less membrane when it cures. Tough rubber-like – flexible, elastomeric and damage resistant. Single component-cold applied and ready to use Excellent adhesion to most building substrates Efficient curing membrane to newly placed concrete Asbestos free. Can be applied on damp substrates Excellent resistance against chemicals (Chloride, sulphate ions, acids and alkalis) Environmentally friendly, cold applied – no flame hazard. Health Friendly and non-hazardous. Prevent fungal growth Dual advantage of curing as well as protection of concrete Excellent resistance to all types of chemicals ( Chloride and Sulphate ions ) Water based, Ultra low VOC and LEED comply. Field of Application Designed for multi purpose projects Suitable for damp proofing below ground. Water proofing /damp proofing of most substrates. Provides an air, vapor and rain barrier to construction surfaces such as masonry, concrete, gypsum board and wood. Protection of foundations, columns and beams. Water proofing, vapor, air protection of structures ,retaining walls and facades For use as an adhesive on wood blocks, wood mosaics, polystyrene insulation boards etc. Waterproofing for interior, exterior walls and wet areas Protection of concrete substructures, super structures and manholes from corrosive soil ConfirmationDRYBITUMEX R650 confirms to ASTM D1227, Type III, Class I and ASTM D3747, Type I standards and British standard BS3416 Type 1, BS 3690:Part 2 19189 “protection of buildings against water, vapor and air and damp proofing.Application ProcedureSURFACE PREPERATIONAll surfaces must be sound, clean and free from dust, oil or grease and other loose materials. Surface may be dump but there should not be any standing water and can be applied to fresh freshly cast concrete too. If requires, prime coat DRYPRIME SB will improve adhesion.ApplicationPrior to the application , stir the product well . Apply in two coats at a spread rate of 1-4m²/coat. The succeeding coats should be applied at right angles to the preceding coats. For best results allow each coat to dry then apply next prior to the surface becoming contami nated. If subsequent coats are applied to 'non-cured' coats, inter-coat bubbling may result. The coverage depends upon the substrate, application method and project requirements. Tools: Application may be by brush, roller, or airless spray. Brush: Suitable for small areas and flashings. Use a synthetic bristle brush. Roller: Recommended when coating small areas. Use a smooth roller. Airless Spray: 4000 psi min. ½” hose min. 0.025 to 0.039 inch orifice reversible tip. PackingAvailable in 20 litre Pail and 200 Litre drum StorageStore materials between 10°C-50°C with careful handling to prevent damage to products. If conditions exceed these ranges, special consideration in storage must be taken. Do not store at high temperatures in direct sunlight. Shelf life under normal conditions in closed container will be 24 months.Health and SafetyKeep out of reach of children. Ensure to maintain good ventilation during ap plication and drying process. In case of skin contact, wash with soap and water or a recognized skin cleaner. Avoid contact with eyes. In case of contact with eyes rinse immediately with running water and seek medical advice. If product is ingested drink plenty of water or milk. Do not induce vomiting at any time. Seek medical advice. Refer to the Material Safety Data Sheet (MSDS) for detailed infor mation about the product and transportation and classification criteria. DryTex P2000 Waterproofing Chemicals http://www.organixbuildingsystem.com/drytex-p2000-waterproofing-chemicals.htm http://www.organixbuildingsystem.com/drytex-p2000-waterproofing-chemicals.htm Wed, 21 Oct 2020 00:00:00 +0530 DRYTEX P2000 high performance solvent free polyurethane based protective coating is designed to exceed the ever changing needs of both the industrial and commercial markets for seamless, hygienic and safe trafficable UV resistant roof waterproofing and protection coating. DRYTEX P2000 Heavy duty olyurethane Systems are Unique as they are specifically formulated to meet the demands of existing and new build fast track projects. It is One-component, heavyduty, exterior/interior, low-VOC, high-solids, polyester aliphatic urethane industrial floor coating. Provides a high gloss, UV stable ,excellent chemical resistance, color retention and chalk resistance . A range of resin rich floor systems that are moisture tolerant are ideally suited to the most aggressive environments, solvent free, non tainting and fully serviceable at temperatures up to 120° centigrade. DRYTEX P2000 is available in a range of standard systems in coloured finishes which include smooth, textured, terrazzo surfaces and antistatic grades.Feaures High resistance to abrasion High resistance to impact Chemical resistance Impermeability to liquids Crack-bridging Slip resistance Electrical conductivity Weather stability and colour fastness Easy cleaning and care Good leveling UV resistant Low VOC DRYTEX P2000 was designed for use as wear resistant, waterproof membrane on vehicular and pedestrian traffic decks. DRYTEX P2000 is a durable abrasion resistant coating which waterproof and protects occupied spaces below, while isolating the substrate from the destructive forces of gasoline, oil, salts, solvents cleaning compounds and other chemicals commonly found in deck structures.Surface PreparationAll surfaces must be clean and free of any moisture, dirt, oil, grease, soapy films, surface chemicals, or other foreign contaminants .Surfaces shall be free of sharp projections, ridges and losses aggregate. The actual surface preparation procedures which are to be followed on a specific project will vary depending upon the age of the concrete, the degree of finishing or troweling, or presence of contaminants or curing compounds. Coating ApplicationThrough mix DRYTEX P2000 prior to utilizing the material. Apply by brush, roller or airless spray and if required go for the second coat. Successive coats should be applied perpendicular to the previous coat to assure positive coverage and uniform film build. All surface must be uniformly coated and be free from voids, pinholes and blisters. Allow each separate coat of DRYTEX P2000 to dry tack free prior to Appling an additional coat. This will take a minimum of 4 hours.CoverageCoverage rates will depend on the profile of the substrate. To obtain a 250micron thickness coat apply DRYTEX P2000 at a rate of 4 sq m per Litre. To obtain a 500 micron thickness coat apply DRYTEX P2000 at a rate of 2 sq m per Litre.Packing and Shelf Life 5L and 20 L, If stored under covered roof , shelf life will be 18 months.SafetyKeep out of reach of children. Ensure to maintain good ventilation during application and drying process. In case of skin contact, wash with soap and water or a recognized skin cleaner. Avoid contact with eyes. In case of contact with eyes rinse immediately with running water and seek medical advice. If product is ingested drink plenty of water or milk. Do not induce vomiting at any time. Seek medical advice. Refer to the Material Safety Data Sheet (MSDS) for detailed information about the product and transportation and classification criteria. DryTex Cemar 800 Waterproofing Chemicals http://www.organixbuildingsystem.com/drytex-cemar-800-waterproofing-chemicals.htm http://www.organixbuildingsystem.com/drytex-cemar-800-waterproofing-chemicals.htm Wed, 21 Oct 2020 00:00:00 +0530 CEMAR 800 is an extremely advanced eco friendly urethane and butadiene polymerized liquid elastomeric membrane that contains root inhibiting additives. It adheres firmly to the surface forming a seamless durable fast drying waterproof and anti-root film preventing the penetration of roots. It is specially applicable for the waterproofing surfaces where root resistance is required like planters, and roof gardens. Designed for multi projects where Anti Root properties are required. Features excellent adhesion, the material dries to a tough seamless flexible membrane. It exhibits excellent elongation and recovery properties.Uses - CEMAR 800 can be used Terrace gardens, planters and roof gardens. Waterproofing underground garages and other structures which are covered with soil. Against ground humidity and leakage in foundations. Foundation piles, Retaining walls and Curtain walls. Galleries, drainage and water channels. Waterproofing surfaces where root resistance is required. Benefits and Advantages Absolute waterproofing and High productivity Environmentally friendly, easy application and excellent adhesion High strength and elasticity No need of reinforcing fabric on most substrates Anti Root properties are tested in accordance to DIN 4062 General Instructions for all ApplicatiomsDRYTEX CEMAR may be applied with airless spray, brush or roller.Surface must be sound stable with an even finish and free from dirt, dust, loose debris, oil and greaseDT CEMAR may be applied to damp but not waterlogged surfacesNew concrete can be waterproofed 48 hours after castingWhere subsequent coats are to be applied, the first coat must be dryStorage and Safety Store under cover out of direct sunlight and protect from extreme of temperatures In tropical climate the product must be stored in temperature controlled area. Shelf life up to 12 months when stored as above For Safety detailed instructions, please refer to the MSDS Application Make sure that all surfaces are sound, stable with an even finish and free from dust, loose debris, grease etc. Apply a first layer @500micron with airless spray, brush or roller using sufficient product to provide a uniform, solid coat Let it dry for 6 hrs and apply the second coat if necessary. Let it dry for 10hours before the installation of fabric filter or soil filling Packing20 LITRE Packs are available as standard and can be customized on demand.Safety & PrecautionsAlthough this is a safe to use product it is recommendedthat you follow good safety and hygiene practices. It is solvent free and contains no VOC's and is consideredsafe to use. Wearing of gloves is recommended and goggles against splashes. Good ventilation is recommended and avoid contact with skin, eyes and mouth. Refer to products Material Safety Data Sheet for full safety data. DryTex INSTA 502 Waterproofing Chemicals http://www.organixbuildingsystem.com/drytex-insta-502-waterproofing-chemicals.htm http://www.organixbuildingsystem.com/drytex-insta-502-waterproofing-chemicals.htm Wed, 21 Oct 2020 00:00:00 +0530 DryTex INSTA 502 is a Polyurethane Injection resin designed to seal cracks in the structures. INSTA 502 polyurethane resin rapidly cures to form impermeable flexible seal. INSTA 502 is solvent free and resistant to hydrolysis and use for sealing of leakages or to stop active water leaks with a high flow or high hydrostatic pressure. This high grade injection resin is designed for application in damp and dry cracks. Good adhesive properties and product flexibility minimize formation of new cracks in the structure.Features Forms a high strength permanent sealing with high strength in the crack or joint. Low viscosity allows deep penetration in to finer cracks Single injection sealing of water-bearing cracks and joints Highly Flexible to accommodate differential movements Withstands high hydrostatic pressures Non toxic when contacted with drinking water. High density and elasticity foam with excellent waterproof property. Excellent adhesion to mineral construction materials Compatible with concrete, steel, masonry mortar, GRC and various substrates It is chemically resistant against water, salts, acids and alkali, mineral oils, fungus and bacteria, Suitable for Ground water, sea water and petroleum products. Comply with NSF/ANSI 61-5 std for potable water and resistant to biological attack. Application Field Ideal to seal the moving and non moving cracks associated with building sub structure ,slab, roof, masonry, reservoirs , dam , tunnel , bridge, man hole and specified constructions. Suitable for basement waterproofing, permanent sealing to stop active leaks from concrete cracks. Good for new construction and repair on existing structures.Typical General Application Steps STEP 1 - Preliminary Analysis Analysis helps the technician to identify the exact location and the width of the crack tobe injected. Sometimes the concrete surface is hidden under a surface of mineral depos its left from long-term water leakage. Items that obscure the crack should be removed,because the crack must to be seen clearly in order to layout the drilling patterns for the injection holes STEP 2 – Preparation of the substrate For leaking joints, injection holes to be angle drilled in to the joint . For leaking cracks , drillthe injection holes in a zig-zag pattern around the crack to make sure that the injectionhole intersects the crack. In order to inject resin into the crack, it is necessary to install injec tion ports ( packers ). The diameter of the average injection hole shall be 13mm dependingon the packer used. Packers are supplied in several diameters and lengths. The angle while drilling should be approximately 45° or less to the surface and towards the crack. Drill at 45 angle in to the crack or joint. Ideally the injection hole should intersect the joint or crack half way through the thickness of the wall or slab The depth of the drill hole intersecting the crack should be somewhere close to the middle  of structure, if possible. Holes deeper than 30 cm are usually not required even if the con crete being repaired is more than 100cm thick. Holes should always be staggered from  one side of the crack to the other. The remmendable number of hole is four in 100cm. This assures a higher percentage of holes intersecting the crack, even if the angle of the crack within the concrete is not perpendicular to the surface. No two cracks behave just alike. In some instances a crack will fill from just a few injection packers. The distance of the drilled holes to each other usually varies from approximately 15cm to 25cm according to the width of the crack. The wider the crack, the further apart are the drill holes STEP 3 - Fixing the Packer Blow the dust out of the injection hole with a probe that reaches the back of the hole . Fix a packer of the right diameter in to the injection hole Place packers in the previously drilled hole, so that the top of the rubber sleeve is below the concrete surface. If the packer can’t be pushed into the hole, tap it in. Tighten the packer with a wrench as tight as necessary. STEP 4- Flush the crack In some circumstances, it can be very useful to flush the crack with water to improve the subsequent penetration of the PU resin into thicker walls. Flushing helps to detect blind holes, or lost continuity of a crack. STEP 5- PU Resin injection When all preparation work is completed, make sure the injection pump is in a good working order. Load the resin hopper and charge the pump, hose, and gun. Open the valve on the gun, and allow all remaining solvent to pass while watching for the resin to appear. Catch all surplus material and solvent in a waste container. Start slowly injecting the crack, holding the pressure line allows the operator to feel the pump pulsations.If the resin continuous to flow freely out of the crack, stops pumping and apply a surface seal over the crack with rapid setting cement or place absorbent materials. Proceed pumping until the resin has traveled from a packer to the next , and is oozing out slowly on the visible side of the crack. Once you are assured that the resin has reached the next injection packer, shut- off resin flow, disconnect your pressure line and proceed to the next packer. Some cases need to be re-inject up to three times. Continue in this fashion until the crack is completely filled. STEP 6- Cleaning and service Once the injection work is completed, a good and thorough cleanup is essential. The pack ers can be removed within 24 hours and the holes should be patched. If desired, an electric grinder can be used to remove excess cured grout that flowed out the crack. Packing and Storage Standard 4 L & 10 L Cans /Pails . Store materials between 40°-90°F with careful handling to prevent damage to products. If conditions exceed these ranges, special consideration in storage must be taken. Do not store at high temperatures in direct sunlight. Shelf life under normal conditions in closed container will be 12 months.Health and Safety Non Hazardous ; if ingested seek medical adviceThis data is provided in the belief that it is accurate within generally accepted standards and is provided for the information of qualified personnel. It does not constitute an offer by the manufacturer, nor does the manufacturer warrant or guarantee its accuracy or completeness in describing the describing the perfor mance or suitability of the various products. The users therefore should make their own determination in using the product of the data contained herein for any application. All values given are subject to +5‐10% Aquashield Waterproofing Chemicals http://www.organixbuildingsystem.com/aquashield-waterproofing-chemicals.htm http://www.organixbuildingsystem.com/aquashield-waterproofing-chemicals.htm Wed, 21 Oct 2020 00:00:00 +0530 AQUASHIELD PVC Waterstop is a product designed for use in concrete construction containing joints, one side of which is subject to hydrostatic ressure. AQUASHIELD PVC Waterstop is used as a barrier within the joint to prevent the passage of liquid through or across the joint. It is embedded in the concrete on both sides of the joint, and spans the joint. It is designed to accommodate lateral and transverse movement which can cause a joint to open, close or misalign. Embedded in concrete, across and or along the joint, water stops form a watertight diaphragm that prevents the passage of fluid through the joint. AQUASHIELD waterstops meet or exceed the standards of the most stringent specifications, including the U.S. Army Corps of Engineers CRD-C 572-74.Features Flexible but firm , Extreme weather resistant. Withstand very low temperature to high. Chemical resistant, saline solutions and sewage in general Withstanding shear movements and to resisting hydrostatic pressure. Excellent and long lasting plasticity. Application Field Construction joints in foundation slabs or below grade walls Supporting walls, steel H-piles, and other penetrations New-to-existing concrete work Septic tanks, sanitary and storm sewer manholes Tunnels and metro constructions. Dams, locks, canals and water reservoirs. InstallationWater stop is joined by fusion ( hot melt). First, cut the water stop ends at right angle. Aligned, hold in place using alignment plates and fixtures, heated using hot air gun (350f) and press together to form a butt joint to get a continuous barrier. Installation of Water stop involves split forms. In the first pour the water stop is held in place with blocks or other suitable arrangements on the outside of the split form (away from the concrete which is to he poured). After the first pour has set up, the split forms and block are removed. When the adjoining pour is made, care should be taken to support the water stopAvailabilityAQUASHIELD PVC water stops are available in standard roll of 15 m length Storage And Shelf LifeThe product will last 60 months from the date of production if stored in its original and sealed packages, in a dry and covered place and with temperatures not exceeding 55°C. They need to be protected from UV raysSafety PrecuationsIt is recommended that to provide enough ventilation while heating the edges to make the butt joints. Use eye and face protection masks.GuaranteeAQUASHIELD water stops are produced with the best row materials available in order to obtain a high quality product . Our guarantee covers the quality of the product but its applications which cannot be under our controlPrecautionsStore PVC water stops under tarps or indoors to avoid direct exposure to sunlight. PVC can suffer UV degradation from the sun. Extended UV exposure will leach the plasticizer from the PVC, reducing its physical properties and causing the PVC to become brittle. Protect installed water stops from UV if the pour of concrete will be delayed more than 30 days. SealFlex PU2000 Construction Sealants http://www.organixbuildingsystem.com/sealflex-pu2000-construction-sealants.htm http://www.organixbuildingsystem.com/sealflex-pu2000-construction-sealants.htm Wed, 21 Oct 2020 00:00:00 +0530 SEALFLEX PU2000 is a single pack, pourable, elastomeric PU sealant which effectively seals all joins subject to structural movement as well as non-moving joints against ingress of water and dirt. It is a non-slumping high performance, 100 %neutral cure sealant formulated with completely earth friendly system. It gives superior adhesion and durability in a wide range of glazing, weather sealing and trade applications. It has excellent resistance to weathering, UV radiations, vibration, moisture, ozone, temperature extremes, airborne pollutants, and many cleaning detergents and solvents. Uses For sealing of vertical or horizontal concrete joints, precast concrete, horizontal traffic, civil structures. curtain-wall panels, pavements, factories, terraces Also, for all joint seal applications where a short curing period is required, such as expansion and contraction joints in shopping centers, sidewalks or any other medium to heavy traffic areas. It will effectively prevent water from entering the sealed joints and thereby eliminate erosion of the soil underneath the slabs. All coping joints and deck joints should be sealed. It’s resistant to chemicals.Features Outstanding durability Self leveling and pourable Neutral cure and Low oxime odor One part no mixing and Permanently flexible Excellent gun ability (-20°C to 50°C) jet fuel resistant Weather proof and Low shrinkage Special FeaturesHighly Chemical resistant, Oil resistant and very stable to Oxon.Installation - Joint DesignJoints are designed such that the movement does not exceed %30 of the joint width.Surface preparation All joints must be absolutely clean. For concrete, sand blasting is recommended. All curing compounds, grease, waterproofing compounds, etc. must be removed. Polyurethane rod or polyurethane foam is recommended as a joint-filler and backup material. Fillers treatment with bituminous products, grease or oil should not be used. Where present, they must be removed or separated by vinyl tape or polyethylene film.ApplicationApply by caulking gun. Sealant should be applied in a continuous operation using sufficient pressure to fill the joint and make complete contact to the joint sides. Tool the sealant slightly concave using solvent or dry-tooling techniques. Do not tool with soap or detergent and water solutions.Maintenance If SEAL FLEX PU2000 is damaged, and the joint has not been contained, it can be repaired by cutting out that part and resealing it with SEAL FLEX PU2000.Packing Sizes 600 ml single pack cartridges and 20 Litre Pails.StorageSEALFLEX PU2000 has a shelf life of twelve months from date of manufacture when stored in the original unopened container in dry, shaded conditions.Technical Support OBS representatives are available to assist you in selecting an appropriate product and to provide on-site application instructions or to conduct jobsite inspections. For further assistance contact ORGANIX tech.support.Health and Safety Wear protective clothing, gloves and goggles. Skin : Avoid repeated or prolonged contact, if contact occurs ,clean with hand cleaner that removes oil or grease , then clean with soap and water. Eyes : Contact could cause irritation. If contact occurs, flush with clean water. Inhalation : Can cause dizziness.Remove to fresh air and if breathing difficulty persists, administer oxygen. SealFlex PS Construction Sealants http://www.organixbuildingsystem.com/sealflex-ps-construction-sealants.htm http://www.organixbuildingsystem.com/sealflex-ps-construction-sealants.htm Wed, 21 Oct 2020 00:00:00 +0530 SEAL FLEX PS is a two-part, polysulfide sealant which effectively seals all joins subject to structural movement as well as non-moving joints against ingress of water and dirt. It is available in in gun and pouring grade.Advantages Flexible and elastic but tough. Can be over coated Accommodates continuous cyclic movement Good weather resistance Water Proof UV resistant Excellent adhesion to most substrates Can be painted after 24 hours Application FieldFor sealing of vertical or horizontal concrete joints, curtain-wall panels, tilt-up panels, window glazing, metal setting .Also ,for all joint seal applications where a short curing period is required, such as expansion and contraction joints in shopping centers, sidewalks or any other traffic areas.It will effectively prevent water from entering the sealed joints and thereby eliminate erosion of the soil underneath the slabs. Particularly areas which are in contact with water frequently, such as swimming pool decks and around planters must be protected. All coping joints and deck joints should be sealed. It’s resistant to chemicals.Design CriteriaJoints should be designed so that movement due to shrinkage and thermal change does not exceed 25% of the joint width.Instruction for use Sealflex has excellent adhesion to most substrates used in construction, particularly concrete, mortar, block work, wood, anodized bronze. It also bonds very well to some painted surfaces, but it is advisable to carry out a site trail first to assess the suitability of the particular coating in question.Joint PreparationJoint surface must be clean and dry remove all dust and laitance by grit blasting, grinding or rigorous wire brushing. Blow all joints clean using dry, oil free compressed air. All curing compounds, grease, waterproofing compounds etc must be removed. Polyurethane rod or polyurethane foam is recommended as a joint-filler and backup material. Fillers treatment with bituminous products, grease or oil should not be used. Where present, they must be removed or separated by vinyl tape or polyethylene film.Where necessary to achieve the correct joint profile, backing cord should be used. Where backing cord is not used place bonding tape in the base of joint. Where a neat finish is required, masking tape should be applied down each side of the joint prior to the sealant works, it should be removed immediately after tooling the sealant.PrimingPriming is not generally required with this material, when using in dry, sound, well prepared joints or which have been reformed using resin based mortar. For further assistance, consult with the technical team of ORGANIX.ApplicationApply by caulking gun, hand or pour from container. Bulk sealant can be applied by pumping equipment. Press firmly into joint using a trowel or putty knife to insure good contact.Maintenance If the sealant or system is damaged and the bond is intact, cut out the damaged area and replace. Packing Available Sizes Pore grade: 4 Liter Gun grade: 2.5 Liter StorageSEALFLEX has a shelf life of twelve months from date of manufacture when stored in the original unopened container in dry, shaded conditions.Technical SupportOBS representatives are available to assist you in selecting an appropriate product and to provide on-site application instructions or to conduct jobsite inspections. For further assistance contact ORGANIX tech.support.Health and Safety Wear protective clothing, gloves and goggles. Skin:- Avoid repeated or prolonged contact, if contact occurs ,clean with hand cleaner that removes oil or grease , then clean with soap and water. Eyes :- Contact could cause irritation. If contact occurs, flush with clean water. Inhalation:-Can cause dizziness. Remove to fresh air and if breathing difficulty persists, administer oxygen Sealflex BR Construction Sealants http://www.organixbuildingsystem.com/sealflex-br-construction-sealants.htm http://www.organixbuildingsystem.com/sealflex-br-construction-sealants.htm Wed, 21 Oct 2020 00:00:00 +0530 An internally or externally applied joint sealant in wide range of application in build ing and civil engineering structures . Its thick, buttery consistency allows it to be easily worked into vertical seams on metal roofs, gaps in flashings and around protrusions, and into heavily alligatored areas in weathered built-up roofing.BR is ideally suited for sealing mechanical fasteners and horizontal seams on metal roofs, as well as around flashings, drains and protrusions.Advantages One component, ready to use, simple to apply Can be over coated Does not need priming Good weather resistance Water resistant U V resistant Excellent adhesion to most substrates Formulated for use in Middle east conditions ( extreme weather ) DescriptionSeal flex is based on a specially developed polymer system which gives enhanced technical properties. It cures by loss of carrier to form a flexible seal. It is applied simply from the packing and can be finished neatly using suitable tooling. When cured it will be accommodates thermal and moisture movements. It can be over coated with most gloss or emulsion paints.Instruction for use Sealflex has excellent adhesion to most substrates used in construction, particularly concrete, mortar, block work, wood, anodized bronze. It also bonds very well to some painted surfaces, but it is advisable to carry out a site trail first to assess the suitability fo the particular coating in question.Priming is not generally required with this material, when using in dry, sound, well prepared joints or which have been reformed using resin based mortar. If any thing required, consult with the technical team of ORGANIX.Design CriteriaJoints should be designed so that movement due to shrinkage and thermal change does not exceed the %22.15movement accommodation factor related to the joint width. Sealant depth must never exceed joint width.ApplicationApply the SEALFLEX BR in sufficient quantity to encapsulated fastener heads and com pletely seal the seam or crack being treated, extending the SEALFLEX BR 1 to 2 inches (2.5to 5 cm) on either side of the opening. A stiff-bristle brush should be utilized for working the SEALFLEX BR in to seams, cracks and alligatored areas. When sealing vertical seams on metal roof decks, the SEALFLEX BR should be worked up into the seam with a brush. On horizontal metal roof seams, the SEALFLEX BR should be applied in a 3 to 4 inch (7.5 to 10cm) strip, in 2 coats, to a total thickness of 60 to 80 wet mils (1,524 to 2,032 microns), centered over the seam. All seams must first be checked to assure that there is no more than ¼" (6 mm) deflection when pressure is applied below the seam. Add additional fasteners as necessary to minimize panel deflection.  MaintenanceIf the sealant or system is damaged and the bond is intact, cut out the damaged area and replace. PackingAvailable in 20 kg pails , 5 kg buckets and 600ml catridgeStorageSEALFLEX has a shelf life of twelve months from date of manufacture when stored in the original unopened container in dry, shaded conditions.Technical SupportOBS representatives are available to assist you in selecting an appropriate product and to provide on-site application instructions or to conduct jobsite inspections. For further assistance contact ORGANIX tech.support.Health and Safety Wear protective clothing, gloves and goggles. Skin:- Avoid repeated or prolonged contact, if contact occurs, clean with hand cleaner that removes oil or grease, then clean with soap and water. Eyes :- Contact could cause irritation. If contact occurs, flush with clean water. Inhalation:-Can cause dizziness. Remove to fresh air and if breathing difficulty persists, administer oxygen SealFlex JFR Construction Sealants http://www.organixbuildingsystem.com/sealflex-jfr-construction-sealants.htm http://www.organixbuildingsystem.com/sealflex-jfr-construction-sealants.htm Wed, 21 Oct 2020 00:00:00 +0530 SEALFLEX JFR Jet Fuel Resistant Joint Sealant is a cold applied two-part elastomeric joint sealant. Jet fuel resistant joint sealant has been specifically developed for sealing joints in concrete pavements where fuel and chemical spillages are likely, in particular airfield aprons, runways, taxiways, cargo handling areas, parking areas and gas stations. Its jet fuel and flame resistance makes it ideal for sealing joints where fuel, oil, hydraulic fluid spillage may occur, such as airport fueling locations, highway fuelling stations and ports. It can also be used for wastewater structures, industrial plants, pavements, roads and walkways.Features Resistant to jet blast and penetration from stones and other harmful materials Outstanding temperature range tolerance (-20 C to +70 C) No Primer required Elastomeric and high movement accommodation factor capability Meets SCAQMD Rule 1168 & LEED VOC Limits Formaldehyde free Cyclic movement capability Durable resilient seal Jet blast resistance Good weather resistance Water resistant U V resistant Excellent adhesion to most substrates High movement joints Pavement joints subject to fuel spillage Floors subject to chemical spillage Formulated for use in Middle east conditions (extreme weather) Application Field For sealing joints on airfield runways, parking aprons and other areas where joints may be subject to fuel spillage and jet blast.Instruction to UseSealflex JFR has excellent adhesion to most substrates used in construction, particularly concrete, mortar, block work, wood, anodized bronze. It also bonds very well to some painted surfaces, but it is advisable to carry out a site trail first to assess the suitability fo the particular coating in question. Priming is not generally required with this material, when using in dry, sound, well prepared joints or which have been reformed using resin based mortar. If any thing required , consult with the technical team of ORGANIX.Design Criteria Joints should be designed so that movement due to shrinkage and thermal change does not exceed the 22.15%movement accommodation factor related to the joint width.ApplicationThe SEALFLEX JFR Machine-Mix must be applied by a special plural component mechanical mixer which properly proportions the material. Mix according to the ratio indicated in the application properties section. When mixing can kits, mix Part A and Part B separately to ensure uniformity. Next thoroughly mix the entire contents of both parts of the kit together while taking care to avoid leaving unmixed areas around the sides or bottom of the mixing containers. Maintenance If the sealant or system is damaged and the bond is intact, cut out the damaged area and replace.PackingAvailable in 4 L and 2.5 L packs (Poring and Gun grade) StorageSEALFLEX JFR has a shelf life of twelve months from date of manufacture when stored in the original unopened container in dry, shaded conditions.Technical SupportOBS representatives are available to assist you in selecting an appropriate product and to provide on-site application instructions or to conduct jobsite inspections. For further assistance contact ORGANIX tech.support.Health and Safety Wear protective clothing, gloves and goggles. Skin:- Avoid repeated or prolonged contact, if contact occurs ,clean with hand cleaner that removes oil or grease , then clean with soap and water. Eyes :- Contact could cause irritation. If contact occurs, flush with clean water. Inhalation:- Can cause dizziness. Remove to fresh air and if breathing difficulty persists, administer oxygen SealFlex BIT Construction Sealants http://www.organixbuildingsystem.com/sealflex-bit-construction-sealants.htm http://www.organixbuildingsystem.com/sealflex-bit-construction-sealants.htm Wed, 21 Oct 2020 00:00:00 +0530 SEALFLEX BIT is a flexible and durable neutral cure bitumen sealant based on high-quality bituminous rubber which an be applied immediately (without heating), adheres to most common surfaces, even on wet surfaces and unlike any other mastic sealants such as silicone and polymer, can be gunned directly onto bitumen surfaces such as asphalt etc. Perfect for felt tucks and various roof applications, an ideal roof sealant against bitumen for leaks etc. SEALFLEX BIT especially designed for roof waterproofing applications in combination with Torch On Membranes. These kind of sealants are mainly used for filling and sealing gaps between flashings, penetrations, etc. to assure the waterproof performance of the entire roofAdvantages Good expansion and contraction properties. Good tensile strength & elongation. Watertight joint sealing, seams & connections of roof edges, chimneys, dome lights etc. Fixing of water outlets and gravel trap Adhesion of strips on edges of facades Stability at high ambient temperatures Application FieldFor sealing of vertical or horizontal concrete joints, curtain-wall panels, tilt-up panels, window glazing, metal setting. Also,for all joint seal applications where a short curing period is required, such as expansion and contraction joints in shopping centers, sidewalks or any other traffic areas.It will effectively prevent water from entering the sealed joints and thereby eliminate erosion of the soil underneath the slabs. Particularly areas which are in contact with water frequently, such as swimming pool decks and around planters must be protected. All coping joints and deck joints should be sealed. It’s resistant to chemicals.Instruction for use Sealflex has excellent adhesion to most substrates used in construction, particularly concrete, mortar, block work, wood, anodized bronze. It also bonds very well to some painted surfaces, but it is advisable to carry out a site trail first to assess the suitability of the particular coating in question.Joint PreparationJoint surface must be clean and dry remove all dust and laitance by grit blasting, grinding or rigorous wire brushing. Blow all joints clean using dry, oil free compressed air. All curing compounds, grease, waterproofing compounds etc must be removed. Polyurethane rod or polyurethane foam is recommended as a joint-filler nd backup material. Fillers treatment with bituminous products, grease or oil should not be used. Where present, they must be removed or separated by vinyl tape or polyethylene film.Where necessary to achieve the correct joint profile, backing cord should be used. Where backing cord is not used place bonding tape in the base of joint. Where a neat finish is required, masking tape should be applied down each side of the joint prior to the sealant works, it should be removed immediately after tooling the sealant.PrimingPriming is not generally required with this material, when using in dry, sound, well prepared joints or which have been reformed using resin based mortar. For further assistance, consult with the technical team of ORGANIX. It is recommended to apply one coat of DRYPRIME SB .ApplicationApply by spatula or trowel. Sealant application should start from the bottom of the joint or groove and continued to the top. Press firmly into joint using a trowel or putty knife to insure good contact.Maintenance If the sealant or system is damaged and the bond is intact, cut out the damaged area and replace. Packing - Available Sizes Pore grade: 4 Liter Gun grade: 2.5 Liter StorageSEALFLEX has a shelf life of twelve months from date of manufacture when stored in the original unopened container in dry, shaded conditions.Technical SupportOBS representatives are available to assist you in selecting an appropriate product and to provide on-site application instructions or to conduct jobsite inspections. For further assistance contact ORGANIX tech.support.Health and Safety Wear protective clothing, gloves and goggles. Skin:- Avoid repeated or prolonged contact, if contact occurs ,clean with hand cleaner that removes oil or grease, then clean with soap and water Eyes :- Contact could cause irritation. If contact occurs, flush with clean water. Inhalation:-Can cause dizziness. Remove to fresh air and if breathing difficulty persists, administer oxygen. SealFlex FR400 Construction Sealants http://www.organixbuildingsystem.com/sealflex-fr400-construction-sealants.htm http://www.organixbuildingsystem.com/sealflex-fr400-construction-sealants.htm Wed, 21 Oct 2020 00:00:00 +0530 SEALFLEX-FR400 Sealant is a specifically developed flexible solvent free neutral cure gunnable sealant for fire resistant sealing of joints and service penetrations . SEALFLEX-FR 400 tested up to 4 hours in accordance with ASTM E 814 (UL 1479) , UL 2079 & CAN/ULC-S115 . SEALFLEX-FR Sealant bonds to masonry, concrete, calcium silicate board, plasterboard, metal and cable coverings and remains flexible after curing to accommodate thermal movement.Advantages Tested up to 4 hours F-rating for Control Joints Tested up to 4 hours F-rating for Penetration Seals Non-toxic and non-irritant Acoustic properties Available in white or grey Flexible and Can be painted Good adhesion , suitable for horizontal and vertical applications UV resistant VOC free DescriptionSeal flex FR400 is based on a specially developed elastomeric polymer system which gives enhanced technical properties .It cures by loss of carrier to form a flexible seal. It is applied simply from the cartridge/pail and can be finished neatly using suitable tooling. When cured it will be accommodates thermal and moisture movements. It can be over coated with most gloss or emulsion paints.Test Compliance ASTM E814 and UL1479 Test method for through stop fire penetrations. ASTM E1966 and UL2079 Test method for fire resistance of building joint systems ASTM E1399 Test method for cyclic movement and measuring joint width. ASTM E90 Standard Test Method for Laboratory Measurement of Airborne Sound Instruction for use Sealflex FR400 has excellent adhesion to most substrates used in construction, particularly concrete, mortar, block work, wood, anodized bronze. It also bonds very well to some painted surfaces, but it is advisable to carry out a site trail first to assess the suitability of the particular coating in question.Joint PreparationJoint surface must be clean and dry remove all dust and laitance by grit blasting, grinding or rigorous wire brushing. Blow all joints clean using dry, oil free compressed air.Where necessary to achieve the correct joint profile, backing cord should be used. Where backing cord is not used place bonding tape in the base of joint. Where a neat finish is required, masking tape should be applied down each side of the joint prior to the sealant works, it should be removed immediately after tooling the sealant.PrimingPriming is not generally required with this material, when using in dry, sound, well prepared joints or which have been reformed using resin based mortar. For further assistance, consult with the technical team of ORGANIX.ApplicationSealflex FR400 can be applied by hand, trowel or air operated gun. For larger applications it can be pumped directly from the pail. Sealflex FR400 is applicable for hrough firestop penetrations and for floor to wall, floor-to-floor and head of wall applications. It is flexible and is ideal for applications where joint expansion and contraction can occur. Apply required depth of sealant beginning on the edge of the opening (use over various backing materials required ) Insure that the sealant makes complete contact with the inside surface of the opening and also the surface of the penetrating items. On joints, the surfaces should be clean and free from duct ,dirt, oil, grease, loose material, rust or other substances. Apply the required thickness in the joint or over the insulation if required.Maintenance If the sealant or system is damaged and the bond is intact, cut out the damaged area and replace. PackingAvailable in 20 kg metal pails, 5 kg buckets and std. catridgesStorageSEALFLEX FR400 has a shelf life of twelve months from date of manufacture when stored in the original unopened container in dry, shaded conditions.Technical SupportOBS representatives are available to assist you in selecting an appropriate product and to provide on-site application instructions or to conduct jobsite inspections. For further assistance contact ORGANIX tech.support.Health and Safety Wear protective clothing, gloves and goggles. Skin:- Avoid repeated or prolonged contact, if contact occurs ,clean with hand cleaner that removes oil or grease , then clean with soap and water. Eyes :- Contact could cause irritation. If contact occurs, flush with clean water. Inhalation:-Can cause dizziness. Remove to fresh air and if breathing difficulty persists, administer oxygen. Floorfort EF Industrial Flooring http://www.organixbuildingsystem.com/floorfort-ef-industrial-flooring.htm http://www.organixbuildingsystem.com/floorfort-ef-industrial-flooring.htm Wed, 21 Oct 2020 00:00:00 +0530 FLOOR FORT-EF is a high performance trowel applied solvent free food grade epoxy floor topping with excellent resistant to high mechanical wear and chemical properties. Epoxy Self Smoothing Flooring Screed has been developed typically for areas here optimum chemical resistance combined with decorative effect is required. By using the most up to date in solvent free technology self smoothing system will produce an easily cleaned, non toxic, chemically spill resistant floor with good colour and colour retention. This is a heavy duty industrial flooring. This fluid applied resinous flooring system are optimal for food and beverage companies /industries due to the ability to stand up to the food and safety ith extreme environments.Features Excellent resistance to the affect of wide range of chemicals High strength and durability, Superior resistance to abrasion Solvent free and non toxic Good griping surface Antimicrobial that inhibits up to 99.99% of bacteria 100 % solids material, no noxious during application Designed for heavy domestic or light industrial use VOC less than 50 g/L Application Field Recommended for the food and beverage, pharmaceutical, laboratories, hospitals, chemical factories to produce a decorative seamless performance self leveling floor system. It is an extremely high strength floor topping designed for use wherever food and safety standards must be met. It can be applied on most sound substrates including concrete, quarry tile, brick pavers, wood and metal floors. It will restore deteriorated concrete in to a better than new condition.LEED RequirementsFLOORFORT EF flooring system meet the required VOC and emissions requirements and therefore contribute to LEED EQ Credit 4.2 &4.3 : Low-Emitting Materials HACCP RequirementsFLOORFORT EF food safe flooring system meet the requirements of HACCP to service environments of highest possible hygiene food and beverage safety standards.Application - Surface PreparationThe substrate (concrete) should be one month old and fully dry, clean and sound. The surface must be free from dust, oil, curing compound and any foreign material. The substrate should be moisture free.PrimingPrime the fully prepared surface (Consult OBS-Support for proper selection of primer)MixingMix part A (resin) and part B (hardener) separately for 3 minutes using a speed drill fitted with a paddle. Then slowly add Part C (filler) and mix it well for 3-5 minutes to get even consistency. Apply the ready mix soon after the mixing. Prefer 2.5 mm thickness for general conditions .ApplicationThe well mixed Floor Fort Screed should be spread to uniform thickness on the primed surface using trowel and smoothen it. Apply at desired thickness (1.5mm to 9 mm possible)depending on requirements.Cleaning of Tools Clean all the tools and equipment with Organix Solvent immediately after the use.Packing Three pack system consisting of “A” “B” and “C”. It can be supplied in 22 Kg Multiple Pack setStorage Store under ware house conditions, in the original unopened packs. Shelf life: 12 months under conditions below 45°C.Health & Safety Flash point 52°C, may Irritate to eyes and skin. Avoid breathing fumes, Wear suitable gloves and eye/face protection. Wash hands with water after use. Floor Fort FG Extreame Industrial Flooring http://www.organixbuildingsystem.com/floor-fort-fg-extreame-industrial-flooring.htm http://www.organixbuildingsystem.com/floor-fort-fg-extreame-industrial-flooring.htm Wed, 21 Oct 2020 00:00:00 +0530 FLOORFORT FG - Extreme , a high performance heavy duty polyurethane resin flooring system is designed to exceed the ever changing needs of both the industrial and commercial markets for seamless, smooth , extreme chemical and temperature resistance, hygienic, safe trafficable UV resistant flooring . FLOORFORT FG-Extreme Heavy duty Polyurethane Flooring Systems are Unique as they are specifically formulated to meet the demands of existing and new build fast track projects. It is a multi component, solvent free, flexible hybrid polyurethane flooring system for heavy duty and exterior/interior requirements . This resin rich floor systems that are moisture tolerant and are ideally suited to the most aggressive environments and fully serviceable at temperatures from -40°C up to 130°C centigrade. Features High resistance to abrasion High resistance to impact Maximum Chemical resistance Extremely temperature resistant Slip resistance Weather stability and colour fastness Easy cleaning and care Withstand constantly wet states because of water spills , animal blood etc Heavy duty and vehicle trafficable Completely waterproof and washable Good leveling Non toxic Anti-fungal and Anti-bacterial UV resistant Ultra Low VOC FLOORFORT FG Extreme uses for the floor areas requiring maximum thermal stability and chemical resistance such as food and beverage processing industries, cool rooms and freez ers, commercial kitchens, abattoir, chemical plants, laboratories, auto mobile industrie , phar maceutical and hospitals .Surface Preparation All surfaces must be clean and free of any moisture, dirt, oil, grease, soapy films, surface chemicals, or other foreign contaminants. Surfaces shall be free of sharp projections, ridges and losses aggregate. The actual surface preparation procedures which are to be followed on a specific project will vary depending upon the age of the concrete, the degree of finishing or troweling, or presence of contaminants or curing compounds. Mixing FLOORFORT FG-Extreme is supplied in pre-measured multi components ( Base, Hardener , Binders , Colorant for Specific requirements ). Base and hardener components should be stirred separately before mixing together. Mix colour pack along with hardener component to achieve a uniform consistency . Add base and continue mixing . Add Binding fillers slowly in to the mixed components and continue mixing further for at least three minutes to obtain a lump free mixture . Always prefer to mix the given pre measured quantity at one shot and use within the pot life to attain maximum performance of the product . ApplicationThrough mix FLOORFORT FG extreme should be spread on the prepared surface with a notched trowel to a desired thickness . prior to utilizing the material. Apply by brush, roller or airless spray and if required go for the second coat. Successive spreads should be placed perpendicular to the previous spread before the surfaces begins to set to assure positive and uniform build. Entire surface must be uniformly spread and be free from voids, pinholes and blisters. CoverageCoverage rates will depend on the profile of the substrate. To obtain a 3 mm thickness flooring, requires 3 liters of the mixture. Packing and Shelf Life Multi Component set, If stored under covered roof, shelf life will be 12 months Health and SafetyKeep out of reach of children. Ensure to maintain good ventilation during application and drying process. In case of skin contact, wash with soap and water or a recognized skin cleaner. Avoid contact with eyes. In case of contact with eyes rinse immediately with running water and seek medical advice. If product is ingested drink plenty of water or milk. Do not induce vomiting at any time. Seek medical advice. Refer to the Material Safety Data Sheet (MSDS) for detailed information about the product and transportation and classification criteria. Floorfort ES100 Industrial Flooring http://www.organixbuildingsystem.com/floorfort-es100-industrial-flooring.htm http://www.organixbuildingsystem.com/floorfort-es100-industrial-flooring.htm Wed, 21 Oct 2020 00:00:00 +0530 FLOOR FORT-ES 100 is a high performance trowel applied solvent free floor topping with excellent resistant to high mechanical wear and chemical properties. Epoxy Self Smoothing Flooring Screed has been devel oped typically for areas where optimum chemical resistance com bined with decorative effect is required. By using the most up to date in solvent free technology self smoothing system will produce an easily cleaned, non toxic, chemically spill resistant floor with ood colour and colour retention. This is a heavy duty indus trial flooring.Advantages Superior resistance to abrasion and excellent resistance to the affect of wide range of chemicals High strength and durability Solvent free and non toxic Good griping surface Designed for heavy domestic or light industrial use VOC less than 50 g/L Application FieldCommonly used in laboratories, hospitals, chemical factories and garages to produce a decorative performance self leveling floor system. It is an extremely high strength floor topping and ideally suited for heavy manufacturing plants, Hospitals, oil refineries, metal treatment plants, workshops and chemical plants etc.Chemical ResistanceFLOOR FORT–ES 100 has been tested for resistance to a comprehensive range of industrial chemicals. This result below was obtained after constant immersion for 3 months at 20ºC and 35ºC.Application - Surface PreparationThe substrate (concrete) should be one month old and fully dry, clean and sound. The surface must be free from dust, oil, curing compound and any foreign mate rial. The substrate should be moisture free.PrimingPrime the fully prepared surface with the given primer.MixingMix part A (resin) and part B (hardener) separately for 3 minutes using a ES 100 speed drill fitted with a paddle. Then slowly add Part C (filler) and mix it well for 3-5 minutes to get even consistency. Apply the ready mix soon after the mixing.ApplicationThe well mixed Floor Fort Screed should be spread to uniform thickness on the primed surface using trowel and smoothen it. Apply at desired thickness( 1.5mm to 50mm possible )depending on requirements.Cleaning of Tools Clean all the tools and equipment with Organix Solvent immediately after the use.PackingThree pack system consisting of “A” “B” and “C”, aggregate, resin and hardener. It can be supplied in 10 kg. and 25 kg. packs.StorageStore under ware house conditions, in the original unopened packs. Shelf life: 12 months under conditions below 45°C.Health and SafetyFlash point 52°C, may Irritate to eyes and skin. Avoid breathing fumes, Wear suitable gloves and eye/face protection. Wash hands with water after use. FloorFORT 100 Industrial Flooring http://www.organixbuildingsystem.com/floorfort-100-industrial-flooring.htm http://www.organixbuildingsystem.com/floorfort-100-industrial-flooring.htm Wed, 21 Oct 2020 00:00:00 +0530 FLOOR FORT-100 is a two-component solvent free high build epoxy floor coating and it provides concrete floor surface excellent resistance to abrasion and protection against chemical attack. It’s a good ard-wearing floor coating at Food processing plants, manufacturing ,hospitals, warehouses, showrooms etc. It can be used for vertical and horizontal applications.Different grades of slip resistance can be achieved by inclusion of graded aggregate between coats.Features Excellent chemical and abrasion resistant Solvent free, no odour during application Seamless and hygienic finish Available in wide range of colors Attractive, glossy finish which can be easily cleaned Can be used with Non-slip aggregate which provides safe foot traffic. Application Procedure  - Surface PreparationThe substrate (concrete) should be fully dry, clean and sound. Vacuum blasting is preferred Cracks should be repaired and should allow to cure. Surface irregularities must be ground down or filled out with FLOORFITREL or repair materials from ORGANIX. The substrate should be moisture free. After all preparation has been completed, ensure dust is removed from the surface. This is best achieved using an industrial vacuum.PrimingIf required, Prime the fully prepared surface with the given primer.MixingMix part A (resin) and part B (hardener) separately for 1 minute using a slow speed drill fitted with a paddle. Then add Part B in to Part A and mix well for 3 minutes to get even consistency. CoatingApply using quality brush or short nap roller ensuring surfaces are fully covered. After when the first coat get cured (24hrs), apply the second coat at right angles to the first with minimum thickness of 200 microns each coat.If Non –slip surface is required by broad casting FLOOR FORT Anti slip grain to FF 100 first coat whilst still wet. After drying the excess aggregate should be vacuum cleaned from the surface.The top coat can now be applied. Depending on the surface profile, type and density of the FF aggregate used, the top coat may consume more material than the base coat to achieve a fully sealed surface. The top coat must be applied within the maximum over coating time period i.e. 36 hours at 25°C or 24 hours at 40°. Expansion joints in the existing substrate floor must continue through the FloorFort coating. Contact your local BASF representative for advise on ORGANIX SealFlex sealants.Cleaning of ToolsClean all the tools and equipment with solvent based epoxy cleaner immediately after the use.PackingAvailable in 20 L and 5 L PackStorageStore under ware house conditions, in the original unopened packs. Store out of direct sunlight, clear of the ground and on pallets. Protect from rainfall. Avoid excessive compaction and protect from extrems of temperatureShelf life12 months under conditions below 35°CHealth and Safety Wear protective clothing, gloves and goggles. Skin:- Avoid repeated or prolonged contact, if contact occurs ,clean with hand cleaner that removes oil or grease, then clean with soap and water. Eyes :- Contact could cause irritation. If contact occurs, flush with clean water. Inhalation:-Can cause dizziness. Remove to fresh air and if breathing difficulty persists, administer oxygen. Wafshield IB645 Protective Coatings & Sealers http://www.organixbuildingsystem.com/wafshield-ib645-protective-coatings-amp-sealers.htm http://www.organixbuildingsystem.com/wafshield-ib645-protective-coatings-amp-sealers.htm Wed, 21 Oct 2020 00:00:00 +0530 WAFSHIELD.IB645 is a fluid applied, flexible protective coating formulated with elastomeric resin which forms a membrane that expands and contracts. WAFSHIELD.IB645 specifically formulated and designed to apply over all types of substrates from concrete, precast concrete, various type of concrete blocks, cement board, stones, metal, plastering and wood as a waterproofing, air, moisture,fire barrier and UV resistant protection. It will not crack, crumble, or peel despite exposure to severe weather or total joint movement and retains its elasticity at very low temperatures and in extreme of heat, protecting from water and aggressive atmospheric chemicals. Features Completely seamless protective membrane High performance waterproofing. Excellent Moisture, Air and Ignition barrier Energy Star rated product which saves Energy Optimum UV resistant, Abrasion resistant & Protects corrosion Good resistance to alkalis, salt solutions and diluted acids Non-Hazardous Composition and Non combustible Free of fibres and asbestos Low VOC, non-toxic and environmentally compliant Fire retardant (ASTM E 84 Class 1 & EN 13501 Class A) Thermal resistant, Resistant to movement and continuous contact with moisture Non toxic and high impact on building longevity Façade fire protection,Watertight, Vapour barrier and wind tight Water based and Non – flammabl Application Field Facades, Roof, Curtain walls, Terrace to act as a complete barrier against air, water, vapor, fire and UV. Provides Moisture protection behind wall claddings of ACP, brick, Insulation systems, various other external façade finishing. Typical application projects with maximum fire resistance requirements. Envelope for high rise and rise residential, commercial and institutional towers, buildings and complexes.Installation Surface Preparation - Surfaces to be coated must be clean, dry and free of any oil, grease or dirt. Patch and repair cracks, blisters and other problem areas using suitable materials recommended by OBS technical support. Any existing coating must be checked for good adhesion. The loose existing coatings should be removed well. Clean by wire brush and use pressured air to blow out all the dust. Application - Tools or equipments to be used for the application -Roller (Short nap roller),Brush (Good quality synthetic bristle brush),Spray (Airless Sprayer, 1gpm, 3,000 psi, .027 or .031 tip) Mixing - Mix with a paddle and drill at low speed for 3 minutes for optimum consistency. Coating Application - All roof-preparation materials must be allowed to dry prior to application of the WAFSHIELD .IB645 coating. Immediately prior to application of the coating, all dust, dirt and other contaminants should be blown off the roof surfaces using compressed air. Apply the elastomeric coating by brush, roller or airless spray, using a multi pass technique to ensure even coating application to all sides of the substrate. Make a conscious effort to apply coating into crimped or pre-sealed vertical (side-lap) seams that have not been detailed. According to project specification and requirements , apply the second coat of WAFSHIELD . IB645 using a cross hatch technique. Packing20 Kg StorageStore materials between 10°C-50°C with careful handling to prevent damage to products. If conditions exceed these ranges, special consideration in storage must be taken. Do not store at high temperatures in direct sunlight. Shelf life under normal conditions in closed container will be 24 months.WarrantyOn preapproved, qualified applications, when you use an approved applicator, a 25-year warranty is available. Contact us for complete warranty information.Health and SafetyKeep out of reach of children. Ensure to maintain good ventilation during application and drying process. In case of skin contact, wash with soap and water or a recognized skin cleaner. Avoid contact with eyes. In case of contact with eyes rinse immediately with running water and seek medical advice. If product is ingested drink plenty of water or milk. Do not induce vomiting at any time. Seek medical advice. Refer to the Material Safety Data Sheet (MSDS) for detailed information about the product and transportation and classification criteria. FeriCoat E2600 Protective Coatings & Sealers http://www.organixbuildingsystem.com/fericoat-e2600-protective-coatings-amp-sealers.htm http://www.organixbuildingsystem.com/fericoat-e2600-protective-coatings-amp-sealers.htm Wed, 21 Oct 2020 00:00:00 +0530 FERICOAT – E2600 is a two-component, high-performance solvent free epoxy based protective coating acceptable for either topside or in constant submersion duty. t provides excellent adhesion, chemical resistance, hardness and durability in harsh or abusive environments making it a favorite in many commercial applica tions. A government spec formula so you know you are getting the best! Use FERICOAT – E2600 wherever salt air and abusive weather conditions require an exceptionally hard, highly durable rust preventative epoxy barrier coating. It provides outstanding protection in virtually all interior and exterior applications. Intended for use on all metals, wood, fiberglass, aluminum, composite materials, concrete and masonry. Acceptable for use on hulls, bulkheads, decks, machinery, high traffic areas, control panels, cabinets, material handling equipment, gangways and ramps. Use it to refinish and protect water tanks and piping. Apply using brush, roller or spray (conventional, airless or electrostatic).Features A barrier coating acceptable for use above or below the waterline. Provides outstanding resistance to chemicals and spilled fuel. Produces an exceptionally hard scuff resistant finish. Provides superior adhesion, hardness and durability. Self leveling formula reduces brush and roller marks. Produces beautiful finish available in 100 colors plus clear. The hard, tough, durable finish offers unsurpassed stain, chemical, and abrasion resist ance Extreme chemical resistant FERICOAT Epoxy coatings are extensively utilized in protective coatings due to their gener ally high level of mechanical properties, corrosion protection and chemical resistance. In the last few decades epoxy coatings have evolved from high VOC systems to more environ mentally friendly technologies with high solids solvent-free coatings Rather, FERICOAT – E2600 provide unique technical solutions to overcome well known prob lems that have remained unsolved for many years in our industry, like adhesion to, blistering promoted by osmotic pressure, poor stain resistance against acidic foods, and color stability Application Factors The various factors which play a significant role in influencing the performance of a coating system applied to a substrate include the shape, absorbency, dryness, chemical reactivity, flexibility, temperature and textureRecommented PreparationFor best results remove old paint, loose scale, wax, oil and contaminates. Sand or scuff all surfaces prior to the application of any primer or coating. Fiberglass, aluminum, concrete, masonry and stainless steel, galvanized steel - strongly recommend the use of FERICOAT – E2600. All wood surfaces must be thoroughly cleaned and dry before the application of primer or coatings. Steel: All surfaces must be thoroughly dry and free of contaminates before the application of any primer or marine paint. ApplicationFERICOAT – E2600 supplied as two components, comprising part A and part B. Part B is added to Part A prior to the application and requires mechanical stirring. This mixture can be applied. Brush roller or good result also attained by spraying. Application of an under coat will provide depth in color and durability to the finished surface. Use the largest Brush possible. Long flexible bristles are best and a good technique is the criss-cross method.Apply With BrushApply to the surface with a diagonal brushing action from the left to the right. This is then spread further with horizontal strokes before finally laying off with light vertical strokes. This results in any brush marks being able to flow out to give the best possible finish.PackingAvailable as a two component kit. 1 US G /5 US G Kit.Thin And Clean UpThinning not typically required. Use only with ORGANIX recommended thinner. Clean all equipment thoroughly with Lacquer Thinner or ORGANIX recommended one. Clean up with Lacquer Thinner ORGANIX recommended one.Use proper clothing, preferably minimum 60% cotton and equipment to protect skin from contact even though here are no specific antidotes for skin irritation. If it gets in eyes, should be washed with water or saline solution at least for ten minutes. Safety boots that are anti-static should cover at least the ankles. Natural ventilation is neces sary during the application. Avoid spraying in high wind. Consult ORGANIX safety support for further assistance FortFlex 9000 Protective Coatings & Sealers http://www.organixbuildingsystem.com/fortflex-9000-protective-coatings-amp-sealers.htm http://www.organixbuildingsystem.com/fortflex-9000-protective-coatings-amp-sealers.htm Wed, 21 Oct 2020 00:00:00 +0530 FortFlex 9000 A high performance, epoxy lining designed to cure at low temperatures and exhibit excellent resistance properties to a wide variety of chemicals and corrosives. Maintains flexibility and toughness better than standard epoxies of this class. Exhib its excellent adhesion, sag resistance and corrosion resistance. It is a high 100 % solids, flake filled, premium epoxy coating designed for internal steel and concrete substrates with high impact resistance, superior bonding ability to steel and concrete, resistance to broad range of chemicals.Uses Chemical storage Tanks Oil Storage Tanks Waste water applications Cold Water reservoir Industrial and Residential Water tank Chemicals ResistanceFortFlex 9000 is resistant to a broad range of chemicals such as fuels, salts, alkalies, some solvent, and many acids (including concentrated sulphuric acid).Surface PreparationSteel Immediately prior to application of the coating or lining, the steel substrate must be clean of all oil, grease, dirt, mill scale, rust, flash rust, corrosion products, salts solvents, chlorides, other chemicals, and existing coatings.All welds must be smooth and continuous, no skip welds. All weld splatter, buckshot, lamina tions, and slivers must be removed and ground smooth; undercuts and pinholes must be ground smooth and filled with weld metal. All projections, sharp edges, high points and fillets must be ground smooth to a radius of at least 1/8 in and all corners must be likewise rounded.All pitting, gouges, scratches, and other defects must be repaired either by welding or by illing with repair materials that are compatible with the coating or lining system and suitable for the intended service conditions. All surfaces to be coated or lined be readily accessible. The steel must be blasted to a minimum near white metal finish (SSPC SP10) with a 100 micron dense, sharp anchor profile free of peening, as measured by ASTM D4417.ConcreteImmediately prior to application of coating, concrete substrate must be adequately cured (generally, at least 28 days)., structurally sound, free of all dirt, dust, debris, oil, grease, fats, chemical contamination, salts, solvents, surface hardeners, incomplete curing compoundsand foam release agents, laitance and efflorescene. Concrete surface must be dry.Locate all expansion joints, controls joints, floor drains, equipment base plats, and mid-floor termination points. Handle them as per construction details.Concrete is a very porous material. As it warms during the day it expels air, or ‘outgases’. Coating applied while concrete is out gassing will likely develop bubbles and pinholes.To avoid this, the material should be applied when the temperature of the concrete is falling. Usually this is from late afternoon into the night. Stop applying the material well before dawn. So it has time to set up firm to touch before out gassing begins. This may be anywhere from 1-6 hours, depending upon the weather conditons. In addition, it is good idea to shade the work area from direct sunlight. Do not apply material when temperature will fall within 3°C of the dew point.Priming may be required in situations where out gassing could be a problem.Application MIXING-Use a jiffy type mixer. When operating the mixer avoid plunging it up and down in the bucket. The can fold air into the resin, which may cause bubbles to form in the coating after it has been applied. Individually stir each separate Part A and Part B component to a smooth, uniform consistency and colour. Spray-Immediately before applying a spray coat, stripe all continuous welds and edges with a brush-coat to assure adequate protection of the areas. All spray equipment should be clean and in proper working order COVERAGE-1.0 litre of coating applied wet at 350micron thick (2 coats applied at 175 micron each) will cover 3-4 square meter. Curing Surface temperature 24°C Dry to touch – 12 hours, Final cure – 36 hours before immersion 32°C Dry to touch – 4 hours, Final cure – 24 hours before immersion SafetyHandle with care, before and after use. Follow local safety regulations. All skin contact with resin products should be avoided. Barrier creams should be used and operatives should wear protective clothing for further information please request the Material Safety Data Sheet of this product. Careseal GS204 Protective Coatings & Sealers http://www.organixbuildingsystem.com/careseal-gs204-protective-coatings-amp-sealers.htm http://www.organixbuildingsystem.com/careseal-gs204-protective-coatings-amp-sealers.htm Wed, 21 Oct 2020 00:00:00 +0530 CARESEAL GS 204 Grout Sealer is an affordable, water-based penetrating sealer that will provide protection against most common stains for sanded and non-sanded cementitious grout joints. It can also be used as a pre-grouting sealer. CARESEAL GS 204 is an aqueous fluorochemical dispersion that provides a durable, subsurface, transparent protective barrier against oil and water on porous mineral surfaces such as stone and tile. The product is used in waterbased penetrating sealers for stone, unglazed tile, grout, terra cotta, and other porous mineral surfaces such as concrete and brick. CARESEAL GS 204 provides oil and water repellency, stain resistance, and easy stain cleanup.Features Water based sealer Protection against most common stains Easy to apply and will not alter the colour of the grout joint For interior and exterior applications VOC comply UsesRecommended for indoor and outdoor use, on a wide variety of surfaces, ncluding natural stone, tile, paving, brick, kitchens, bathrooms, laundries, pool surrounds, garages, entertainment areas and patios. Can be used on porous tile, natural stone, masonrySurface PreparationSurface must be dry and free of contaminants , including previously applied sealers , dirt ,lime and hard water deposits , rust and other heavy soil and grime.Allow new grout installations to cure for at least 48 hours before applicationSurface and sealer temperature should be between 5C° and 46C°Packing5 L , 20 LStorageStore materials between 40°-90°F with careful handling to prevent damage to products. If conditions exceed these ranges, special consideration in storage must be taken. Do not store at high temperatures in direct sunlight. Shelf life under normal conditions in closed container will be 12 months.Warranty On preapproved, qualified applications, when you use an approved applicator, a 25-year warranty is available. Contact us for complete warranty information High Bond SBR Construction Chemicals http://www.organixbuildingsystem.com/high-bond-sbr-construction-chemicals.htm http://www.organixbuildingsystem.com/high-bond-sbr-construction-chemicals.htm Wed, 21 Oct 2020 00:00:00 +0530 HIGHBOND SBR is a high performance, non-redispersible, Styrene Butadiene Rubber latex designed bonding agent and multipurpose admixture for cementitious systems which enhances water and abrasion resistance and increase durability. HIGH BOND SBR Waterproof Bonding Agent is ideal for use in internal and external renderings, flooring screeds and patch repairs. It can be used internally or externally where improvements in the physical properties of Portland cements systems are required.Features Increases durability and flexibility Ensures bonding of floor toppings, renders and repairs Reduces shrinkage and cracking Increased durability and toughness. High resistance to water penetration. Good abrasion resistance and proven performance Good resistance to many chemicals, frost, salt and to mineral oil. Excellent adhesion to steel and concrete. Adheres well to brick, glass, asphalt, wood, expanded polystyrene etc Prolonged corrosion protection. Similar thermal expansion and modulus properties to concrete (unlike resin mortars and primers). Non-toxic. Can be used with potable water. Application Field For external rendering. For general concrete repair For plasters in swimming pools, fountains and water storage tanks . For laying industrial flooring, Screening and Roofing. For waterproofing and tanking For corrosion protection of steel Properties Conforms to ASTM C 1059, Type IISurface PreparationAll surfaces must be sound, clean, free from dust, grease, oil and loose materials. Surfaces with high suction should be thoroughly dampened before application. Any excess water should be removed from the surface before application. Sands used in the mixes should be well graded, clean, sharp sands, and should conform to the appropriate standards.ApplicationHot, exposed or very absorbent surfaces should bed dampened prior to application or priming with a mix of 1:8 bond and water. Washed aggregate and sand particle sizes should also correspond to the thickness of mortar to be applied and the required surface finish. SBR is compatible with manual mixing or misers of rotating blades. Agitation should be minimized to maintain good densities and avoid penetration of air.For better effects all applications other than those sprayed on renders, a bonding primer coat 1:1 (HIGHBOND SBR : Water) is recommended. This can be brushed into the prepared surface and fresh mortar should be applied while the bonding coat is still wet. If it is water resisting renders please ensure that two priming coats are applied at right angles to a minimum and normal thickness of 1.5mm.General Mix Mortars Cement : 25Kgs Sand : 75Kgs Highbond SBR : 5ltrs Details Minimum water to attain desired workability (1:1 up to 1:4 HIGHBOND SBR & Water)where improved properties are required for thick bed mortar and renders above 15mm thickness, increase the latex use in the above ratio with HIGHBOND SBR to 7.5 Ltrs. Where Chemical resistance is required such as Battery Rooms, Water Treatment Areas etc. increase SBR according to the above ratio with HIGHBOND SBR to 10 Ltrs. Where only thin bedding is required mortars should employ richer cement/stand approaching 1:1 sand: Cement and SBR at 5 Ltrs per 25Kgs of Cement with water to the desired consistency. Repairs to Concrete: Apply priming coat (1:1 water) and allow to be tacky. Proceed to patch up repairs using a standard mix or one part Portland cement 2.5 parts clean and washed sharp sand missed to approximate consistency with one part SBR and three parts of water. As plaster Bonding Agent: For gypsum, light weight gypsum and anhydrous plasters, seal the surfaces as required and prime with a solution of 1:1 (SBR: Water) till it becomes tacky and plaster straight on to the tacky surface in usual mode. For heavier rendering and cementitious toppings, Key Coat (Slurry Bond Coat) is compulsory. Key coat is prepared at 1:1(HIGHBOND SBR: Cement) with minimum make up water to provide brushable consistency. Apply to form a tacky coat and plaster straight on the tacky surface. Highbond SBRIs recommended in view of its high strength and water resistance for - Exterior Plastering & 2. High Grade Interior Plastering.CleaningClean all equipment with water immediately after usePacking200 Litre Drums and 20 Ltr Pails/Jerry CansHealth & Safety Instruction Non Hazardous. if ingested seek medical advice . is essentially non hazardous in normal use. For further information please refer to Health and Safety data sheets available on request. Curecrete C 300A Construction Chemicals http://www.organixbuildingsystem.com/curecrete-c-300a-construction-chemicals.htm http://www.organixbuildingsystem.com/curecrete-c-300a-construction-chemicals.htm Wed, 21 Oct 2020 00:00:00 +0530 CURECRETE C 300 is a water based, advanced acrylic formula, curing compound and water sealer/repellent in one. It’s a special liquid formulation, curing and sealing compound based on acrylic resin emulsion, wetting agent and additive. It is used to prevent rapid evaporation of water from fresh concrete ensuring uniform hydration, adequate strength development and also minimize plastic shrinkage cracks. It is also used to seal concrete against ingress of waterborne salts such as chlorides, sulphates and atmospheric carbon dioxide gas. It has excellent curing and sealing properties. CURECRETE C 300 is very cost effective and labor saving eliminate.Excellent UV stable curing and sealing performance from a ready-to-use, sprayable, user-friendly curing agentBenefits Controls water retention and evaporation rates in newly placed concrete to provide added strength and protection Seals and protects cured concrete surfaces against moisture penetration Provides for complete development of concrete’s wear resistance and strength properties. will reduce the loss of and rapid evaporation of surface water, especially critical in gusty or windy conditions, control initial expansion and ultimate shrinkage thereby eliminating or reducing shrinkage cracks Provides the proper moist condition and maintains a perfect curing environment for concrete. Produces hard, dense concrete … minimizes hair checking, thermal cracking, dusting and other defects. Offers a compressive strength significantly greater than improperly or uncured concrete. When used as a curing compound, CURECRETE C 300 does not require any  additional curing time before flooring can be installed, provided complete  hydration of the slab has taken place. This accelerates the normal time frame allowing for non-interrupted scheduling of the project Non toxic, non irritating, non flammable, easy to use and environmental friendly. Increases tensile strength for greater resistance to cracking and surface crazing. Improves resistance to the abrasion and corrosive actions of salts and chemicals. Ready to spray because of low viscosity. VOC compliant :- VOC content is <50 g/L. Direction For UseBefore using, stir CURECRETE C 300 in the can. Transfer contents to a conventional back pack spray machine and apply top fresh concrete evenly and uniformly. Maintain uniform spraying pressure to avoid puddles. Apply CURECRETE C 300 at the earliest opportunity immediately when initial bleed water has disappeared.On formed concrete, wash the surface of the concrete with clean water immediately after removing the forms. Immediately after surface water has disappeared, apply CURECRETE C 300 by spray, roller or brush. Application Rate Curing - Apply at the rate of 5 square meters per liter, one coat. Sealing - Apply at the rate of 5 square meters per liter per coat. Two coats recommended allowing first coat to dry for at least 3 hours but not more than 36 hours. Surface FinishesCURECRETE C 300 acts as a primer for water-based emulsion paints such as PVA, Acrylic, Ethylene Vinyl Acetate, PVC, etc.It is also compatible with bituminous emulsion and latex-modified cementitious renders and tile adhesive.Clean UpPrior to drying, equipment may be easily cleaned with soap and water. Once dried, use mineral spirits or other suitable petroleum solvent. Health and Safety4Using gloves, goggles and other protective clothing is advised to use C-300 4If swallowed, do not induce vomiting Direct contact may result in mild irritation. Read and follow all application, label,  precautions, and health and safety information prior to use. Refer to the Material  Safety Data Sheet for complete health and safety information.Storage15 months if stored at 35°C under shed.PackingCURECRETE C 300 is available in 20 Ltr. Pail 200 Ltr. drum.Precautions Keep From Freezing. Do not apply when the temperature of the air and/or the concrete is less than 40º F (4º C). DO NOT MIX OR DILUTE WITH ANY OTHER PRODUCTS OR LIQUIDS. Do not use on surfaces that are later to be painted, tiled, hardened, sealed or treated in any manner. Do not use on patios, sidewalks or other areas where there is typically no wheel traffic to abrade the white film urface. Not recommended for use on residential applications. NoteAll information is given in good faith on the results gained from experience and tests. However, all recommendations or suggestions are made without guarantee since we don't have any control on site conditions and its uses. Touffset EG55 Construction Chemicals http://www.organixbuildingsystem.com/touffset-eg55-construction-chemicals.htm http://www.organixbuildingsystem.com/touffset-eg55-construction-chemicals.htm Wed, 21 Oct 2020 00:00:00 +0530 Touffset EG55 is a multi component anchor cartridge system g based on a high grade epoxy resin with superior chemical and abrasion resistance. Touffset EG55 is having high bond strength to concrete, steel, wood and other available substrates. Its it suitable for dry, damp and wet substrates.Features Solvent and Formaldehyde free Chemical resistance and waterproof Prevent corrosion Shrinkage free and high grab. High Load Capacity and Uniform distribution of the load Impact and vibration resistant. Re usable Fire rated Excellent adhesion , Suitable for horizontal and vertical applications Styrene free LEED compliant ultralow VOC Level Field of Application Touffset EG55 is a high strength material with no shrinkage and suitable for anchor grouting in high abrasion, chemical resistance and immersed situations. Common uses are :- Fixing to masonry and rock Post installation re-bar Bonding and Crack sealing applications Anchoring structural steals Anchors for machinery and cranes Fixing of Starter bars, anchor bolts, anchor sockets and threaded studs Suitable for extreme temperature variant applications Suitable for installation of fence and railing posts, gates, window grills, bathroom fittings, ac units and lights Application - Hole PreparationAnchor bolt holes should be drilled using air or rotary percussion drilling equipment. If diamond core or non percussive drills are used then sides of the hole must be thoroughly roughened Grouting Drill hole to the desired correct diameter and depth Clean out the hole using a stiff wire or nylon brush and clean compressed air Remove the cap and plugs from the cartridge . Attached mixer nozzle , place in applicator and dispose the part of the cartridge waste until an even colour is achieved Insert the mixer nozzle to the far end of the hole and half fill the hole. Withdrawing the nozzle as the hole fills . For deep holes , extension tubing can be used Immediately insert the fixing . This should be done slowly with a slight twisting motion Excess resin should be removed from the mouth of the hole before it sets Leave the fixing undisturbed until loading time is elapsed Attach the fixture and tighten the nut Packaging Standard Cartridges Shelf LifeStore in dry conditions between 5°C to 40°C. The shelf life is 12 months when unopened and stored correctly.CleaningClean all tools and equipment immediately with OrgaCLEAN or any suggested cleaning  agent Health and SafetyThis product is for industrial use only by trained operatives. It is potentially hazardous if not used correctly. Please refer to the Material Safety Data Sheet (MSDS) prior to the purchase and use of this product. The MSDS can be obtained from support@ organixbs.com. Topgrout E70 Construction Chemicals http://www.organixbuildingsystem.com/topgrout-e70-construction-chemicals.htm http://www.organixbuildingsystem.com/topgrout-e70-construction-chemicals.htm Wed, 21 Oct 2020 00:00:00 +0530 TOPGROUT E70 is a multi component epoxy tile grout based on a high grade epoxy resin system with superior chemical and abrasion resistance. TOPGROUT E70 is having high bond strength to concrete , steel , wood and other available substrates.Advantages Meets SCAQMD Rule 1168 & LEED VOC Limits Solvent and Formaldehyde free Chemical resistance. Shrinkage free and high grab. Damp proof resistance and waterproof . Impact and vibration resistant. Excellent adhesion, Suitable for horizontal and vertical applications Resistant to staining and Cleans with water Meets LEED VOC requirements Field Of ApplicationTOPGROUT E70 is a high strength material with no shrinkage, and suitable for grouting tiles in high abrasion, chemical resistance and immersed situations. TOPGROUT E70 suitable to use to grout the tile for residential and industrial floor and wall such as laboratories, food processing plants, hospitals, abattoirs, kitchen and swimming pool where superior resistance properties are required. TOPGROUT E70 suitable for internal and external applications and is impervious to water and other liquids.Chemical Resistant –Acids Excellent to Citric Acid, Tartaric Acid, Nitric Acid, Formic Acid, Lactic Hydrochloric Acid,Sulphuric Acid etc.Chemical Resistant –Alkalis Excellent to Ammonia in solution, Caustic soda, Chlorine, Sodium bisulphite, Potassium hydroxide, Potassium permanganateColourAvailable in different RAL colours Packaging3, 5 & 10 Kg Set. Larger packs available upon request.Shelf LifeStore in dry conditions between 5°C to 40°C. The shelf life is 12 months when unopened and stored correctly.Installation GuidelinesTOPGROUT E70 provides detailed method statements on all its products for use in various applications. These must be referred to prior to starting work. The information below is a summary intended for guidance only.Substrate PreparationThe tile joints must be clean, free of any contamination.Mixing Mix components together thoroughly with a slow speed drill for 2 to 3 minutes (max 400 R.P.M.) and continue mixing until homogeneous. Packs can be split if suitable weighing and measuring equipment is available at the job site. Where multiple small areas are to be grouted, transfer the mixed grout to clean buckets and distribute to the grouting teams to allow them to use the product within 45 minutes.GroutingTOPGROUT E70 should be applied after 12 hours but within 24 hours after application of the tile adhesive. This will help ensure uniform stress distribution at the bond line and maximum bond. Apply using a rubber grouting spatula or trowel, taking care to ensure that is well compacted into the joints. Excess material should be removed immediately from the tile surface using a damp cloth or sponge.JointsEnsure that movement and perimeter joints are incorporated as per the relevant Code of Practice.CleaningClean all tools and equipment immediately with OrgaCLEAN or any suggested cleaning agent Health and SafetyThis product is for industrial use only by trained operatives. It is potentially hazardous if not used correctly. Please refer to the Material Safety Data Sheet (MSDS) prior to the purchase and use of this product. The MSDS can be obtained from support@ organixbs.com Ultral EPDM150 ASTM D 4637 EPDM Waterproofing Membrane http://www.organixbuildingsystem.com/ultral-epdm150-astm-d-4637-epdm-waterproofing-membrane.htm http://www.organixbuildingsystem.com/ultral-epdm150-astm-d-4637-epdm-waterproofing-membrane.htm Wed, 21 Oct 2020 00:00:00 +0530 ULTRAL EPDM 150 is a Ethylene Propylene Diene Monomer (EPDM) roofing membrane designed for long-term performance for roof waterproofing system application. ULTRAL EPDM 150 membrane is a lightweight, durable and weatherproof single-ply waterproofing membrane perfect for a wide variety of applications. Properly designed, installed, and maintained EPDM systems can successfully withstand extreme weather cycles. For more than three decades, ULTRAL EPDM 150 have proven that it can withstand extreme temperature fluctuations and constant exposure to direct sunlight. Also, it has exceptional elasticity and will not split or crack under normal building movement.ULTRAL EPDM offers proven long-term performance since decades. ULTRAL EPDM is an un reinforced, uniform, flexible waterproofing membrane for uninterrupted waterproofing and protection of buildings.ULTRAL EPDM is one of the most sustainable and environmentally responsible roofing and building protection materials used today in the construction industry. Its successful track record of superior overall system performance results in low life cycle costs . As one of the most sustainable roofing and building protection materials used today in the construction industry, EPDM offers excellent performance throughout the extended life cycle of the roof and building protection system.ULTRAL EPDM 150 has gained industry-wide acceptance and respect by providingimmediate and long-term roofing solutions. As more emphasis is placed on the sustainable performance of building materials, ULTRAL EPDM continues to be the roofing and building protection material that stands the test of time.Features Excellent weatherability and Superior Strength UV and ozone resistant and Highly Durable Impermeable to water Compatibility and Proven Durability High resistance to ozone, weathering and abrasion Flexibility in low temperatures Superior resistance to extreme heat and fire Thermal shock durability Ultraviolet radiation resistance Sustainable Building Construction Complying Product Field Of Application: Roofs of all types Building Envelopes Building Façade and Curtain Wall Building Substructure and Superstructure waterproofing and protection SystemsMechanically fastened system combines sound & durable quality with simple and easy installation. Loosely lay the EPDM membrane on top of concrete roof .Then secure it with termination bar and fastener.Fully-adhered system conforms to the idea of fully bonded installation. It is EPDM membrane directly to the smooth and clean substrate .roof decks and for supporting heavy loads. Loosely lay the EPDM membrane over the substrate. Then, cover the membrane with gravelsPackingLength : 20 M : WIDTH 1.5 to 4 MStorage And SafetyStore in a covered place and read ORGANIX MSDS of ULTRAL EPDM prior to the application D-FIX EPDM Waterproofing Membrane http://www.organixbuildingsystem.com/d-fix-epdm-waterproofing-membrane.htm http://www.organixbuildingsystem.com/d-fix-epdm-waterproofing-membrane.htm Wed, 21 Oct 2020 00:00:00 +0530 D-FIX is a high strength bonding adhesive, specially formed to bond all types of materials. D-FIX is compatible with all types of insulation materials, structural and lightweight concrete, plywood, oriented strand board, wood fiberboard etc.Features Excellent bonding ability and permanent adhesion Recommended for bonding of EPDM with variety of materials Easy application Resistant to water and moisture No mixing required Solvent-free and non-flammable Extreme adhesion for ultimate bonding Excellent heat temp ( +/_) resistant Highly Durable Odor-free Single-sided, wet lay-in adhesive Low VOC content (less than 50 g / litre ) Application FieldCan be used for variety of special applications including bonding to wood, concrete block, steel, paper and plastic.Bonding the membrane/protection boards to other various materials and to itself.Contact adhesive in construction and automotive industriesCoverage RateThe coverage rate for PRIMEX is between 200g/m², dependant upon the evenness and porosity of the substrate and the type of application.ApplicationBefore application the surface should be clean, free of dust, moisture and grease. D-FIX isapplied to the substrate with a brush or roller.. EPDM Bonding Adhesive is installed in a onesided, wet lay-in application on horizontal surfaces. For vertical surfaces, the adhesive is used in the traditional two-sided application, and the two surfaces are mated only after the adhesive becomes tacky (approx. 10 - 15 minutes). This adhesive is a heat- and moisture-cure product, with the cure time depending upon ambient weather conditions. As such, this adhesive is to be used when the temperature is 40°F. PackingD-FIX is available in 18 L / 5 L metal pails.Coverage6 to 9 sqm/Ltr on an even surface depending upon the substrate material and type of application.StorageWhen stored in original, unopened container the average life is 10 to 14 months at 10 to 35 °Cif stored in above-mentioned conditions. Shelf life information is only a recommendation and not a fact of life. The real expiration date highly depends on the history of storage and handling of the accessories. Quality and applicability should thus always be verified: when mixed, product should stir into a smooth and homogeneous blend with no evidence of major clumping or separation/phasing. Once opened, use within 48 hours.SafetyKeep away from naked fire. For any information. Do not smoke while applying. Do not usein a confined or unventilated area. Vapors are heavier than air and may travel along ground or may be moved by ventilation and ignited by pilot lights, other flames, sparks, heaters, smoking, electrical motors, static discharge, or other ignition sources at locationsdistant from material handling point and flashback. All containers should be grounded hen material is transferred from one container to another. A red caution label is requiredwhen shipping. A fire extinguisher should be available. In case of fire, use water spray, foam, dry chemical or carbon dioxide. Do not use a solid stream of water because it canscatter and spread the fire.ref. MSDS or consult with Safe@organixbs.comPrecautionsRefer to Material Safety Data Sheet. Flammable. Keep away from fire and open flame and other possible ignition sources during storage and use. Do not smoke when using. Use only in well ventilated areas. Avoid prolonged contact with skin. Do not contaminate withforeign materials. For professional use only. Keep out of reach of children. Thinning is notallowed. Avoid breathing vapors. Keep container closed when not in use. Use with adequate ventilation. If inhaled, remove to fresh air. If not breathing, perform artificial respiration. If breathing is difficult, give oxygen. Call a physician immediately. During application, efforts must be made to prevent fumes from entering the building via air ventilationducts. Do not place open containers or mix adhesive near fresh air intake units. When possible, shut down or seal off the closest units. Primex EPDM Waterproofing Membrane http://www.organixbuildingsystem.com/primex-epdm-waterproofing-membrane.htm http://www.organixbuildingsystem.com/primex-epdm-waterproofing-membrane.htm Wed, 21 Oct 2020 00:00:00 +0530 PRIMEX – EPDM is a low viscosity solution of synthetic rubber and resins combined with organic, halogen free solvents. It is intended for use for the lap joint. Primex has been formulated with VOC exempt solvents for use in regulated markets where other solvent borne primers can not be used. This primer does not react with atmospheric moisture allowing it to be opened and resealed for use at a later date.Application ProcedurePRIMEX is suitable for sealing the laps. All surfaces to be primed must be firm, flat, dry and free from dust and grease. PRIMEX is applied to the substrate with a brush or lambs wool roller. Laps should be at least 50mm and spread PRIMEX across the lap area. All work surfaces should be clean, dry, free of dirt, dust, debris,oils, un-adhered coatings, deteriorated membrane and othercontaminants that may result in a surface that is not sound or isuneven. If necessary, clean the surface with an approved EPDMor TPO membrane cleaner prior to application.Coverage RateThe coverage rate for PRIMEX is between 200g/m², dependant upon the even ness and porosity of the substrate and the type of application.Important Imformation PRIMEX will keep for 6 months at °10+C to °25+C in the unopened container. Avoid direct sunlight. Stir thoroughly before use. The minimum application temperature is °5+C. Surfaces and tools can be cleaned PRIMEX is inflammable and should be kept away from naked flames. Smoking is not permitted in the vicinity. Workers area should be ventilated and containers kept closed to prevent inhalation. PackagingPRIMEX is packed in 4.5 kg tins/16 ltr pail.Safety PrecuationsPrimex is a combustible material and should be shipped and stored away from open flames, heat or sources of ignition. Keep all pails tightly sealed while in storage. It should be used only in well-ventilated areas. It may cause eye, skin and respiratory irritation, and is harmful or fatal if swallowed. Avoid contact with skin. Use impervious clothing and rubber gloves to avoid prolonged or repeated contact with skin. Read the container label and follow all safety instructions. Ultral Lapepdm Waterproofing Membrane http://www.organixbuildingsystem.com/ultral-lapepdm-waterproofing-membrane.htm http://www.organixbuildingsystem.com/ultral-lapepdm-waterproofing-membrane.htm Wed, 21 Oct 2020 00:00:00 +0530 ULTRAL LAP - ULTRAL LAP-fast skinning, fast curing product with 2K system. A modified EPOXY Polymer product with excellent adhesion properties on many surfaces. KENT 2K MS Sealer can be used as a fill-and joint sealer, for structure / profile seams or spreadable for larger areas. Applied with static mixer-tip with manual or automat ic gun. An Anaerobic Sealer with Advanced resin technology containing Teflon for Locking, Sealing, Securing and Lap Making. Product is a high viscosity thixo tropic gel paste which cures rapidly, sealing instantly to high strength ULTRAL LAP - specially formulated two-part compound for use on EPDM rubber roofing membrane, concrete substrate, metals, fiberglass and some plastics. It can be used to repair broken parts, fill holes and cracks and build up surfaces. Initial cure is  achieved in approximately 6 minutes. On full cure it can be painted, drilled or cut.Features Contains no solvent - provides 100% solids content, nonflammable, and virtually odorless High strength - provides load bearing properties equal to or greater than the  materials being bonded in many instances Chemically/Environmentally Resistant - resists dilute acids, alkalis, solvents,  greases, oils, moisture, sunlight, and weathering. Temperature resistant from -40°C to +160°C Initial cure in 6 minutes at room temperature Variable full cure - in 12 hours at room temperature or much more quickly at elevated temperatures. Many applications - fills holes and builds up cracks, bonds plastic and metal to one another Sandable with excellent feathering characteristics Cured film can be cut, drilled and painte MixingULTRAL LAP comes as two parts. Dispense equal amounts (golf ball size, for example) of Part A and Part B. These products have a limited shelf life and should be used as soon as possible.(Min shelf life 6 months) Pot Life/Working Time; this material is mass sensitive. The more material you mix at one time, the less time you have to work with it. Working tip If mixing a large quantity, flatten putty with a rolling pin to reduce mass concentration and extend pot lifePacking5/20 Kg Health And SafetyDRYSHIELD contains a tacky compound and during application can adhere to human skin. The stain can be removed by using a cloth dipped in a light solvent. In case the affected area is sensitive, like the eyes, please contact the company physician for advice. and goggles against splashes are recommended. If in eyes, flush thoroughly with clean water, holding open to ensure trapped product may be flushed away. If swallowed, give water to drink and seek medical advice. If inhales, unlikely due to products viscosity, remove to fresh air and apply artificial respiration if required and seel medical attention. If on skin, remove contaminated clothing and wash skin with soap and water.