FLOOR FORT-ES 100 is a high performance trowel applied solvent free floor topping with excellent resistant to high mechanical wear and chemical properties. Epoxy Self Smoothing Flooring Screed has been developed typically for areas where optimum chemical resistance combined with decorative effect is required. By using the most up to date in solvent free technology self smoothing system will produce an easily cleaned, non toxic, chemically spill resistant floor with ood colour and colour retention. This is a heavy duty industrial flooring.
Superior resistance to abrasion and excellent resistance to the affect of wide range of chemicals
High strength and durability
Solvent free and non toxic
Good griping surface
Designed for heavy domestic or light industrial use
VOC less than 50 g/L
Application Field Commonly used in laboratories, hospitals, chemical factories and garages to produce a decorative performance self leveling floor system. It is an extremely high strength floor topping and ideally suited for heavy manufacturing plants, Hospitals, oil refineries, metal treatment plants, workshops and chemical plants etc.
Chemical Resistance FLOOR FORT–ES 100 has been tested for resistance to a comprehensive range of industrial chemicals. This result below was obtained after constant immersion for 3 months at 20ºC and 35ºC.
Application - Surface Preparation The substrate (concrete) should be one month old and fully dry, clean and sound. The surface must be free from dust, oil, curing compound and any foreign material. The substrate should be moisture free.
Priming Prime the fully prepared surface with the given primer.
Mixing Mix part A (resin) and part B (hardener) separately for 3 minutes using a ES 100 speed drill fitted with a paddle. Then slowly add Part C (filler) and mix it well for 3-5 minutes to get even consistency. Apply the ready mix soon after the mixing.
Application The well mixed Floor Fort Screed should be spread to uniform thickness on the primed surface using trowel and smoothen it. Apply at desired thickness( 1.5mm to 50mm possible )depending on requirements.
Cleaning of Tools Clean all the tools and equipment with Organix Solvent immediately after the use.
Packing Three pack system consisting of “A” “B” and “C”, aggregate, resin and hardener. It can be supplied in 10 kg. and 25 kg. packs.
Storage Store under ware house conditions, in the original unopened packs. Shelf life: 12 months under conditions below 45°C.
Health and Safety Flash point 52°C, may Irritate to eyes and skin. Avoid breathing fumes, Wear suitable gloves and eye/face protection. Wash hands with water after use.