FLOOR FORT-EF is a high performance trowel applied solvent free food grade epoxy floor topping with excellent resistant to high mechanical wear and chemical properties. Epoxy Self Smoothing Flooring Screed has been developed typically for areas here optimum chemical resistance combined with decorative effect is required. By using the most up to date in solvent free technology self smoothing system will produce an easily cleaned, non toxic, chemically spill resistant floor with good colour and colour retention. This is a heavy duty industrial flooring. This fluid applied resinous flooring system are optimal for food and beverage companies /industries due to the ability to stand up to the food and safety ith extreme environments.
Excellent resistance to the affect of wide range of chemicals
High strength and durability, Superior resistance to abrasion
Solvent free and non toxic
Good griping surface
Antimicrobial that inhibits up to 99.99% of bacteria
100 % solids material, no noxious during application
Designed for heavy domestic or light industrial use
VOC less than 50 g/L
Application Field Recommended for the food and beverage, pharmaceutical, laboratories, hospitals, chemical factories to produce a decorative seamless performance self leveling floor system. It is an extremely high strength floor topping designed for use wherever food and safety standards must be met. It can be applied on most sound substrates including concrete, quarry tile, brick pavers, wood and metal floors. It will restore deteriorated concrete in to a better than new condition.
LEED Requirements FLOORFORT EF flooring system meet the required VOC and emissions requirements and therefore contribute to LEED EQ Credit 4.2 &4.3 : Low-Emitting Materials
HACCP Requirements FLOORFORT EF food safe flooring system meet the requirements of HACCP to service environments of highest possible hygiene food and beverage safety standards.
Application - Surface Preparation The substrate (concrete) should be one month old and fully dry, clean and sound. The surface must be free from dust, oil, curing compound and any foreign material. The substrate should be moisture free.
Priming Prime the fully prepared surface (Consult OBS-Support for proper selection of primer)
Mixing Mix part A (resin) and part B (hardener) separately for 3 minutes using a speed drill fitted with a paddle. Then slowly add Part C (filler) and mix it well for 3-5 minutes to get even consistency. Apply the ready mix soon after the mixing. Prefer 2.5 mm thickness for general conditions .
Application The well mixed Floor Fort Screed should be spread to uniform thickness on the primed surface using trowel and smoothen it. Apply at desired thickness (1.5mm to 9 mm possible)depending on requirements.
Cleaning of Tools Clean all the tools and equipment with Organix Solvent immediately after the use.
Packing Three pack system consisting of “A” “B” and “C”. It can be supplied in 22 Kg Multiple Pack set
Storage Store under ware house conditions, in the original unopened packs. Shelf life: 12 months under conditions below 45°C.
Health & Safety Flash point 52°C, may Irritate to eyes and skin. Avoid breathing fumes, Wear suitable gloves and eye/face protection. Wash hands with water after use.