Specifications
Construction | Solvent free liquid Elastomeric resin |
Tear Strength | > 28 N/mm |
Tensile strength | 1.6 N/mm² |
Elongation | 450% |
Packaging Type | Plastic Barrels, Drums Tanker |
Packaging Size | 0-5kg, 10-15 kg 15-20kg, 20-25kg and 50-100kg |
Grade | Technical Grade |
Specific Gravity | 1.38 |
Features | Longer Shelf Life |
Quality | Superior |
For More Information Click Here PDF | ![]() |
Additional Information
Product Code | WP05 |
Single-component, fluid applied high build waterproofing membrane based on synthetic resin which are modified in order to get an absolutely waterproof layer. After curing reaction, it will be formed to a tough and flexible seamless waterproofing membrane with high elasticity, suitable for applications to horizontal and vertical surfaces Performance provides an effective monolithic air, vapor and water proof membrane when applied to most construction surfaces. Cold-applied by brush or roller or airless spray.
Outstanding Features
Field of Application
Installation - Surface Preparation
Surface to be waterproofed shall be dry, clean, sound and free of all contaminants which may interfere with adhesion or proper curing and should be dust-free. All shrinkage cracks shall be treated with suitable material. Moving structural cracks shall be routed out and caulked with approved ORGANIX material. Detailing like horizontal-vertical junctures projections, expansion joints and other areas of potential high movement may require reinforcement mat and sealants to detail. Consult with OBS tech for further information. All detailing must be cured before the application of WAPRO.
Application
This liquid is spread at the desired thickness onto the prepared surface. The coating is applied from the container using standard roofing brushes, squeegees or rollers or airless spray equipment at the recommended coverage rates on properly cleaned and prepared dry substrates. Application of the System should be done in one complete step to create a smooth uniform self leveling surface without cold joints, lines or streaks. Apply the first coat at the rate of 500 micron thickness. Let it dry fully (approximately 2 hours should be waited between two layers), then apply the second coat (500micron thickness) . Waiting time shortens in hot weather and lengthens in cold weather. Allow to dry for a minimum of 3 hours before tiling , build up or trafficable.
Health and Safety
Wear protective clothing, gloves and goggles. Skin:- Avoid repeated or prolonged contact, if contact occurs , clean with hand cleaner that removes oil or grease , then clean with soap and water. Eyes :- Contact could cause irritation. If contact occurs, flush with clean water. Inhalation:-Can cause dizziness. Remove to fresh air and if breathing difficulty persists, administer oxygen.
Packing
20 Kg Pail
Storage
Store in cool, dry area. Product is not flammable. Do not allow to freeze. Shelf life - 12 months
Conditions of Use and Disclaimer
The information contained in this Material Data Sheet is given in good faith based upon our current knowledge and does not imply warranty, express or implied. The information is provided and the product is sold on the basis that the product is used for its intended purpose and is used in a proper workmanlike manner in accordance with the instructions of the Product Data Sheet in suitable and safe working conditions. Under no circumstances will the Company be liable for loss, consequential or otherwise, arising from the use of the product.