CEMAR 800 is an extremely advanced eco friendly urethane and butadiene polymerized liquid elastomeric membrane that contains root inhibiting additives. It adheres firmly to the surface forming a seamless durable fast drying waterproof and anti-root film preventing the penetration of roots. It is specially applicable for the waterproofing surfaces where root resistance is required like planters, and roof gardens. Designed for multi projects where Anti Root properties are required. Features excellent adhesion, the material dries to a tough seamless flexible membrane. It exhibits excellent elongation and recovery properties.
Uses - CEMAR 800 can be used
Terrace gardens, planters and roof gardens.
Waterproofing underground garages and other structures which are covered with soil.
Against ground humidity and leakage in foundations.
Foundation piles, Retaining walls and Curtain walls.
Galleries, drainage and water channels.
Waterproofing surfaces where root resistance is required.
Benefits and Advantages
Absolute waterproofing and High productivity
Environmentally friendly, easy application and excellent adhesion
High strength and elasticity
No need of reinforcing fabric on most substrates
Anti Root properties are tested in accordance to DIN 4062
General Instructions for all Applicatioms DRYTEX CEMAR may be applied with airless spray, brush or roller. Surface must be sound stable with an even finish and free from dirt, dust, loose debris, oil and grease DT CEMAR may be applied to damp but not waterlogged surfaces New concrete can be waterproofed 48 hours after casting Where subsequent coats are to be applied, the first coat must be dry
Storage and Safety
Store under cover out of direct sunlight and protect from extreme of temperatures
In tropical climate the product must be stored in temperature controlled area.
Shelf life up to 12 months when stored as above
For Safety detailed instructions, please refer to the MSDS
Make sure that all surfaces are sound, stable with an even finish and free from dust, loose debris, grease etc.
Apply a first layer @500micron with airless spray, brush or roller using sufficient product to provide a uniform, solid coat
Let it dry for 6 hrs and apply the second coat if necessary.
Let it dry for 10hours before the installation of fabric filter or soil filling
Packing 20 LITRE Packs are available as standard and can be customized on demand.
Safety & Precautions Although this is a safe to use product it is recommendedthat you follow good safety and hygiene practices. It is solvent free and contains no VOC's and is consideredsafe to use. Wearing of gloves is recommended and goggles against splashes. Good ventilation is recommended and avoid contact with skin, eyes and mouth. Refer to products Material Safety Data Sheet for full safety data.